E
x
p
l
o
r
e
M
o
r
e
:
Electrochemistry Meters & Analysers
pH Meter Tester Kit for Small Volume and Test Tubes with LabSen 246-5 ATC Semi-Micro Electrode, -2.00 to 16.00 pH
AUD 545.00(Ex GST)
AUD 545.00(Ex GST)
- pH tester kit for small-volume and test tube pH measurement workflows
- Supplied with LabSen 246-5 ATC semi-micro pH / temperature electrode
- Designed for small sample testing as low as 60 µL when used with the included semi-micro container
- Ø6 mm sensor tip supports measurement in narrow vessels and low-volume samples
- Long-Life Reference System supports stable reference potential and extended electrode service life
- Complete kit includes User Manual, LabSen 246-5 pH Electrode, PH60 Meter Body, CalPod Solution Organizer, pH 4.00 Solution, pH 7.00 Solution, pH 10.01 Solution, 3M Soaking KCL Solution, Protective cap and Semi-micro Container
[request_quote_button]
- Description
- Datasheets & Manuals
Description
pH Meter Tester Kit for Small Volume and Test Tubes with LabSen 246-5 ATC Semi-Micro Electrode, -2.00 to 16.00 pH, also known as a portable semi-micro pH tester kit, is designed for users who need practical pH measurement where sample volume is limited. This kit is suitable for laboratories, research teams, education facilities, field users and quality-control workflows where testing may need to be performed in small containers, narrow vessels or test tubes rather than standard beakers.
The meter and electrode combination supports organised portable pH testing where calibration convenience, compact sample handling and application-specific electrode selection are important. It is useful for users working with limited-volume samples that need careful handling and repeatable measurement preparation. The included semi-micro container helps support low-volume measurement setup, while the organiser and carry case keep key accessories together for storage, transport and routine calibration work.
Included with this pH Tester Kit: User Manual, LabSen 246-5 pH Electrode, PH60 Meter Body, CalPod Solution Organizer, pH 4.00 Solution, pH 7.00 Solution, pH 10.01 Solution, 3M Soaking KCL Solution, Protective cap and Semi-micro Container.
Users should confirm the minimum usable sample volume, correct electrode immersion depth, cleaning process and storage procedure before measurement. Small-volume samples can be more sensitive to handling, contamination and temperature variation, so consistent workflow control is important.
LabChoice Australia supplies pH Meter Tester Kits for schools, universities, research laboratories, water-quality users and testing facilities requiring portable pH measurement for small-volume samples, test tubes and general water solution applications.
Features
- Professional pH tester kit
- Includes LabSen 246-5 semi-micro pH electrode
- ATC pH / temperature electrode configuration
- pH range listed as -2.00 to 16.00 pH
- Suitable for small-volume sample testing
- Suitable for test tube measurement workflows
- Designed for general water solution measurement
- Swiss sensor technology referenced in supplied product information
- Ø6 mm sensor tip
- Supports sample volumes as low as 60 µL with included semi-micro container
- Long-Life Reference System
- Supports stable reference potential over time
- Water-resistant meter body
- Automatic calibration function
- Automatic temperature compensation
- Reading alarm settings
- Automatic reading lock function
- Includes ready-to-use pH 4.00 calibration buffer
- Includes ready-to-use pH 7.00 calibration buffer
- Includes ready-to-use pH 10.01 calibration buffer
- Includes soaking solution
- Includes Apera CalPod Solution Organiser
- Includes semi-micro container for small-volume testing
- Rugged carrying case included
- Sample volume, container compatibility, immersion depth, calibration routine and electrode storage procedure should be confirmed before use
Warranty
The instrument is covered for defects in material and workmanship for two years, while the probe is covered for six months from delivery, subject to the manufacturer’s warranty terms.
The limited warranty does not cover issues caused by accidental damage, improper use, normal wear and tear, transport, storage, failure to follow product instructions, unauthorised maintenance, unauthorised modification, unauthorised repair, incompatible use with other products or materials, abuse, accidents or external causes beyond reasonable control.
| Specification | Details |
|---|---|
| pH – Range | -2.00 – 16.00 pH |
| pH – Resolution | 0.01 pH |
| pH – Accuracy | ±0.01 pH ±1 digit |
| pH – Temperature Compensation | 0 to 100°C (Auto or Manual) |
| mV – Range | -1000 mV – 0 – 1000 mV |
| mV – Resolution | 1 mV |
| mV – Accuracy | ±0.2% F.S |
| Temp. – Range | 0 to 100°C (23 to 212°F) |
| Temp. – Resolution | 0.1°C |
| Temp. – Accuracy | ±0.5°C ±1 digit |
| Calibration | Auto. 1–3 points |
| Buffer Recognition | USA: pH 1.68, 4.00, 7.00,10.01, 12.45; NIST: pH 1.68, 4.01, 6.86, 9.18, 12.45 |
| Reading Alarm | Yes |
| Reading Auto. Hold | Yes |
| Temperature Unit | ˚C or ˚F |
| Screen Backlight | 3-color backlight with auto. power off: Blue – measurement mode Green – calibration mode Red – reading alarm |
| Self-diagnosis | Yes |
| Power | AAA Batteries * 4 |
| IP Rating | IP67 |
| Dimensions& Weight | Tester: 40×40×178mm/133g; Case: 255×210×50mm/700g; |
| pH Electrode Technical Specs (LabSen 246-5) | |
| Membrane Type | S |
| Housing Material | Lead-free glass |
| Temperature sensor | 30KΩ NTC |
| Junction | Ceramic |
| Reference Electrode | Long-life |
| Electrolyte | 3M KCl |
| Range | 0 to 13 pH |
| Temperature Range | 0 to 100°C |
| Connector | 8-pin |
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Circuit Board Copper Foil Sheet, 150 × 150 mm
AUD 17.50(Ex GST)
Biological Blood Cell Teaching Model
AUD 217.90(Ex GST)
Extension Adapter Borosilicate Glass Laboratory Grade
From AUD 14.50 (Ex GST)
Biological Digestive System Model on Board, Life Size
AUD 236.90(Ex GST)
Laser View Kit and Part Sets for Optical Fibre
From AUD 103.50 (Ex GST)
You May Also Need
Save 10%
Benchtop Classical Series Multi-Parameter Meter for pH, Conductivity and DO Testing
From AUD 2,467.50 (Ex GST)
Save 10%
Benchtop Touch Screen Multi-Parameter Meter for pH and Conductivity Testing
From AUD 3,146.90 (Ex GST)
Calcium Ion Sensor, Replacement Sensor with 0.1 to 5.0 mmol/L Range
AUD 528.00(Ex GST)
Fluoride Sensor, Replacement Sensor with 0.3 mL Direct Measurement
AUD 227.70(Ex GST)
Nitrate Ion Electrode, Replacement Sensor with Selective Flat Electrode
AUD 227.70(Ex GST)
Pocket Nitrate Ion Meter, 0.3 mL Sample Testing with Up to 2 Calibration Points
AUD 1,314.50(Ex GST)
Pocket Nitrate Ion Meter, Single-Drop On-Site Testing
AUD 764.50(Ex GST)
Pocket ORP and Eh Meter, 0.3 mL Sample Testing with Backlit LCD
AUD 478.50(Ex GST)
Pocket Water Quality Meter, Single-Drop On-Site Testing
AUD 330.00(Ex GST)
Save 10%
Portable Multi-Parameter Meters for pH, Conductivity and Dissolved Oxygen Testing
From AUD 1,723.50 (Ex GST)
Salt Electrode, Replacement Sensor with 0.01 to 25% Salt Range
AUD 227.70(Ex GST)
Sodium Ion Electrode, Replacement Sensor with 2 to 9900 ppm Range
AUD 227.70(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab