Microscope Lamps, Laboratory Illumination Type
From $57.60 (Ex GST)
- Microscope lamps for bench illumination, options for 220/240V mains or 12V AC/DC low voltage operation
- 240V models use 25W pearl lamp with clear or blue tint front glass, blue tint compensates red content
- 12V model uses 12V 20W QI lamp with inbuilt reflector, runs cooler and provides brighter whiter beam
- Strong stainless steel stand holds lamp body, removal by firm pull to spring off stand, described as virtually unbreakable
- Cable options: 1 m two core mains lead with two pin plug, or 1 m lead with stackable 4 mm plugs and lamp to lamp plug through
- Description
Description
IEC microscope lamps for bench illumination, supplied as 220/240V mains models using a 25W pearl lamp with either clear or blue tint front glass, or as a 12V AC/DC low voltage model using a 12V 20W QI lamp with inbuilt reflector. The blue tint glass is specified to compensate the red content of incandescent light and make the output appear whiter. All versions are described as virtually unbreakable and use a strong stainless steel stand that holds the lamp body together, with removal by a firm pull to spring off the stand. Cable and connection style varies by model, 240V models use a 1 m two core mains cable with two pin plug, 12V model uses a 1 m two core lead with moulded stackable 4 mm banana plugs and allows lamp to lamp plug through.
IEC microscope lamp popular for many years, 220/240V mains operated using a 25W pearl lamp. Front glass is clear on this version. Instrument described as virtually unbreakable. Stainless steel stand is strong, simple and effective and holds the microscope lamp body together, to remove the lamp it must be pulled firmly to spring off the stand. A 2 core mains cable 1 m long connects the lamp to power. Note: unit is not tested as a double insulated device, housing is non metallic and the lamp socket is for two connections only and is fully approved. Lamp cannot use an earth wire, therefore a two pin plug and a two core flex is fitted.
IEC microscope lamp popular for many years, 220/240V mains operated using a 25W pearl lamp. Front glass is blue tint on this version to compensate for red content of incandescent light and make the light whiter in colour. Instrument described as virtually unbreakable. Stainless steel stand is strong, simple and effective and holds the microscope lamp body together, to remove the lamp it must be pulled firmly to spring off the stand. A 2 core mains cable 1 m long connects the lamp to power. Note: unit is not tested as a double insulated device, housing is non metallic and the lamp socket is for two connections only and is fully approved. Lamp cannot use an earth wire, therefore a two pin plug and a two core flex is fitted.
New IEC microscope lamp for use on 12V AC or DC. Uses a 12V 20W QI lamp with inbuilt reflector. Runs much cooler and provides a much brighter and whiter beam of light to the subject of illumination. Instrument described as virtually unbreakable. Stainless steel stand is strong, simple and effective and holds the lamp body together, to remove the lamp it must be pulled firmly to spring off the stand. A 2 core cable 1 m long with moulded stackable 4 mm banana plugs fitted connects the lamp to 12V AC or DC power, and one lamp can plug into the socket of any other lamp so there is no need to run each lamp back to the 12V power supply.
Similar Products
Replacement Hose Assembly for Air Source (Spare),2m
$34.10(Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From $1.20 (Ex GST)
Parafilm Sealing Film, Laboratory Grade Stretch Film for Airtight Seals
From $55.00 (Ex GST)
Tensile Testing Machine for Strength of Materials Experiments
$319.00(Ex GST)
Frosted Acrylic Projection Screen with Feet, 200 × 200 mm
$27.00(Ex GST)
Air Table, Dynamics and Kinematics Model
From $3.60 (Ex GST)
Air Track Stop Block, Laboratory Track Stop
From $2.20 (Ex GST)
Wooden Lab Disposable Stirrer - 114 x 10 x 2 mm
From $12.90 (Ex GST)
5-Pair Terminal Distribution Board
$104.00(Ex GST)
Air Track and Air Table Spark Generator, 240 V AC Mains
$747.00(Ex GST)
ASEP Metal Rod Set (8 Pieces), 3 mm Diameter
$32.00(Ex GST)
Digital AC Ammeter and Voltmeter, Dual Display Type
From $147.00 (Ex GST)
Digital AC/DC Multimeters, Portable Lab Use Type
From $34.00 (Ex GST)
High-Sensitivity Digital Electrometer for Low-Charge Measurement
$423.00(Ex GST)
Laboratory Power Supplies and Modules, Multi Function Power Module
From $21.00 (Ex GST)
Loudspeakers in Protective Housing, Enclosed Laboratory Speaker
From $63.00 (Ex GST)
Oscillator Generator at Very Slow Range & Low-Frequency AC Sine
$140.00(Ex GST)
Signal Generators and Wave Study Units
From $384.80 (Ex GST)
Stroboscopes
From $83.00 (Ex GST)
Student Plastic Geoboard with Rubber Bands Included
$15.00(Ex GST)
Timers and Counters
From $269.40 (Ex GST)
Universal Alloy Bench Clamp for Rods up to 13 mm Diameter
$28.00(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Boss Head Clamp for Lab Stands, Powder Coated, Heavy-Duty
From $6.50 (Ex GST)
LATEST PRODUCTS
Siren Disc, Lab Sound Apparatus
From $7.50 (Ex GST)
TOP RATED PRODUCTS
Siren Disc, Lab Sound Apparatus
From $7.50 (Ex GST)
Our Reviews
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab