16 V Belt-Driven Motor/Generator Set
$73.00(Ex GST)
- Two DC motors, permanent magnet fields, belt-coupled via pulleys
- One runs as motor, one as generator, direct energy conversion demo
- Efficiency measured by comparing motor input and generator output energy
- Typical operation around 6 V DC, maximum 16 V specified
- Belt removable, motors usable separately for mechanical experiments
- Description
- Datasheets & Manuals
Description
The IEC electric motor generator set consists of two medium-sized DC motors with permanent magnet fields, coupled by pulleys and a small belt. One motor is driven as a DC motor while the second operates as a DC generator, allowing clear demonstrations of energy conversion from electrical to mechanical, then back to electrical.
Efficiency can be measured by comparing the electrical energy supplied to the motor with the electrical energy taken from the generator. The set is suited to operation around 6 V DC, with a maximum of 16 V as specified. With the belt removed, either motor can be used independently for other mechanical experiments or drive applications.
FAQs
Q: What is included in the set?
A: Two DC motors with permanent magnet fields, pulleys, and a small coupling belt.
Q: How does it work as a motor generator system?
A: One motor is powered as a DC motor, it drives the second unit through the belt so it behaves as a DC generator.
Q: What can be measured with this setup?
A: Efficiency, by comparing electrical input to the motor versus electrical output from the generator.
Q: What voltage is it intended to run at?
A: Around 6 V DC, with a maximum of 16 V as specified.
Q: Can the motors be used separately?
A: Yes, removing the belt allows either motor to be used for other mechanical purposes.
Similar Products
Cylinder Head CC Measuring Kit Plastic (TPX) , High Quality
From $69.90 (Ex GST)
Separating Funnel Kit PTFE Stopcock with SS Retort Ring, BORO 3.3 Glass
From $69.90 (Ex GST)
Separating Funnel Kit Polypropylene with Stopcock, High Quality
From $49.90 (Ex GST)
Air Track Manual, Laboratory Demonstration Guide
From $5.60 (Ex GST)
Buchner Funnel Porcelain, Heavy Duty
From $13.50 (Ex GST)
Glass Pocket Thermometer Adapter BORO 3.3 Laboratory Grade
From $12.90 (Ex GST)
Air Track and Air Table Spark Generator, 240 V AC Mains
$747.00(Ex GST)
Air Track Spark Generator Cables, Precision Connection Set
From $9.90 (Ex GST)
ASEP Small Motor and Generator Kit with Pulley Included
$58.00(Ex GST)
Decision Reaction Timer Device for Response Time Testing
$207.90(Ex GST)
Electric Clinostat on Stand, 4 rev/hour, 240 V AC
$176.00(Ex GST)
Motor Drive Unit with Pulley, Variable Speed Laboratory Unit
From $176.00 (Ex GST)
Simple Clinometer (Inclinometer) for Angle Measurement
$55.00(Ex GST)
U-Shaped Photogate Sensor with Support Rod, General Purpose
$126.00(Ex GST)
Vacuum Base Surface Plate for Demonstrations ,Dia. 200 mm
$223.00(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Boss Head Clamp for Lab Stands, Powder Coated, Heavy-Duty
From $6.50 (Ex GST)
LATEST PRODUCTS
Low Wall Porcelain Crucibles With Lid
From $1.50 (Ex GST)
99% Pure Nickel Crucibles With Lid
From $22.00 (Ex GST)
Glazed Gooch Filtration Crucibles
From $4.50 (Ex GST)
TOP RATED PRODUCTS
Low Wall Porcelain Crucibles With Lid
From $1.50 (Ex GST)
99% Pure Nickel Crucibles With Lid
From $22.00 (Ex GST)
Glazed Gooch Filtration Crucibles
From $4.50 (Ex GST)
Our Reviews
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab