E
x
p
l
o
r
e
M
o
r
e
:
Electrochemistry Meters & Analysers
pH Probe Replacement PH60S-E for PH60S Spear Pocket pH Tester
AUD 340.00(Ex GST)
AUD 340.00(Ex GST)
- Replacement spear pH probe designed for the PH60S Pocket Spear pH Tester
- Also compatible with PH60, PH60F and PC60 testers
- Suitable for direct pH testing in soft-solid and semi-solid sample workflows
- Practical choice for cheese, meat, fruit, vegetables, bread, sushi rice and solid growth medium testing
- Helps extend the usable life of compatible tester bodies when the original probe reaches end of service life
- Non-diaphragm junction design helps reduce clogging during suitable food and semi-solid sample testing
[request_quote_button]
- Description
Description
pH Probe Replacement PH60S-E for PH60S Spear Pocket pH Tester, Soft-Solid Samples, also known as a replacement spear pH electrode, is designed for direct pH testing in compatible soft-solid and semi-solid samples.
This replacement probe is made for the PH60S Pocket Spear pH Tester and is also compatible with PH60, PH60F and PC60 tester models. It is suitable when users need to replace an aged or damaged spear probe without purchasing a complete new tester. The spear glass membrane is designed for sample penetration, making it suitable for cheese, meat, fruit, vegetables, bread, sushi rice, solid growth medium and other compatible solid or semi-solid samples.
The probe uses Swiss sensor technology with a long-life reference system and polymer electrolyte. Its non-diaphragm junction design helps reduce clogging, which is important when testing samples that may contain particles, fibres or thicker textures. The PH60S-E can also be used for general water-solution pH testing where compatible with the selected tester body and application method.
Users should follow correct installation, calibration, rinsing, cleaning and storage procedures after fitting the replacement probe. For food and semi-solid samples, careful cleaning after each test is important to reduce residue build-up around the spear sensor.
LabChoice Australia supplies replacement spear pH probes and tester accessories for food laboratories, QC teams, schools, universities, product testing users and routine sample-testing workflows.
Features
- PH60S-E replacement pH probe
- Compatible with PH60S Pocket Spear pH Tester
- Also compatible with PH60 Pocket pH Tester
- Also compatible with PH60F Pocket Flat pH Tester
- Also compatible with PC60 Multiparameter Pocket Tester
- Spear glass membrane
- Designed for soft-solid sample testing
- Swiss sensor technology
- Long-life reference system
- Polymer electrolyte
- Non-diaphragm junction
- Helps prevent clogging
- Suitable for cheese, meat, fruit, vegetables, bread and sushi rice
- Suitable for solid and semi-solid sample pH testing
- Also works for general water-solution testing
- Probe installation, calibration routine, sample penetration method, cleaning method and storage procedure should be confirmed before use
Warranty
This electrode is covered for defects in material and workmanship for six months from delivery, subject to the manufacturer’s warranty terms.
The limited warranty does not cover issues caused by accidental damage, improper use, normal wear and tear, transport, storage, failure to follow product instructions, unauthorised maintenance, unauthorised modification, unauthorised repair, incompatible use with other products or materials, abuse, accidents or external causes beyond reasonable control.
Reagent Reservoir for Multichannel Pipetting, Sterile
From AUD 59.50 (Ex GST)
Rectangular Prism Blocks, Acrylic and Glass Optics Experiment Type
From AUD 8.90 (Ex GST)
TechTray Dissecting and General Purpose Laboratory Tray
AUD 33.90(Ex GST)
Screw Cap Tube, Amber, Non Sterile
AUD 1,041.50(Ex GST)
pH Meter Kit PH820 Precision Benchtop with LabSen 211 Electrode, ±0.002 pH
AUD 1,250.00(Ex GST)
HDPE Reagent Bottle, Narrow Mouth, Sterile
From AUD 2.41 (Ex GST)
Iodine Test Paper, Vial of 100 Strips
AUD 19.90(Ex GST)
Test Tube Racks, Polypropylene 21 Hole for 30 mm Tubes Laboratory Type
From AUD 8.90 (Ex GST)
Boiling Flask Flat Bottom, Socket Joint, Short Neck, Borosilicate Glass (BORO 3.3)
From AUD 8.00 (Ex GST)
Banana Plugs, 4mm Laboratory Type
From AUD 14.50 (Ex GST)
You May Also Need
Save 10%
Benchtop Classical Series Multi-Parameter Meter for pH, Conductivity and DO Testing
From AUD 2,467.50 (Ex GST)
Digital pH Pen Meters, 0 to 14 pH
From AUD 34.90 (Ex GST)
Fluoride Sensor, Replacement Sensor with 0.3 mL Direct Measurement
AUD 227.70(Ex GST)
Multi Function Soil Meters with Stem Probes
From AUD 24.90 (Ex GST)
Pocket Ionized Calcium Meter, Cow Side Blood Testing with 0.3 mL Sample Volume
AUD 2,183.50(Ex GST)
Pocket Nitrate Ion Meter, Single-Drop On-Site Testing
AUD 764.50(Ex GST)
Save 10%
Pocket Testers with Bluetooth for Portable pH, ORP and Water Testing
From AUD 397.50 (Ex GST)
Pocket Water Quality Meter, Single-Drop On-Site Testing
AUD 330.00(Ex GST)
Save 10%
Portable Single Parameters for pH, ORP, Conductivity and DO Testing
From AUD 1,435.50 (Ex GST)
Salt EC Sensor, 0.12 mL Sample Testing with Ti/Pt Black Cell
AUD 143.00(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Laboratory Beaker, Low Form, Graduated with Spout, Borosilicate Glass (BORO 3.3)
From AUD 2.00 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab
