E
x
p
l
o
r
e
M
o
r
e
:
Electrochemistry Meters & Analysers
pH/Temp Electrode for Strong Alkaline and High-Salinity Solutions, Non-Refillable, 0–14 pH
AUD 360.00(Ex GST)
AUD 360.00(Ex GST)
- Non-refillable pH / temperature electrode for strong alkaline and high-salinity solution testing
- Designed for strong alkalis from pH 10–14 and high salinity solutions above 5000 ppm
- HA-type glass membrane helps minimise alkaline error in demanding high-pH samples
- Open junction and polymer electrolyte support full sample contact while reducing junction clogging
- Silver Ion Trap reference system helps maintain reference potential stability in an Ag⁺-free environment
- Built-in temperature sensor supports automatic temperature compensation on compatible meters
[request_quote_button]
- Description
Description
Non-Refillable pH/Temp Electrode for Strong Alkaline and High-Salinity Solutions, 0–14 pH, also known as a high-alkaline pH / temperature electrode, is designed for users who need dependable pH measurement in challenging water-based samples.
This electrode is suitable for laboratories, water-quality testing, process checks, research and quality-control workflows where strong alkaline or high-salinity samples can affect standard electrode performance. It can also be used for compatible general water solution measurement.
The HA-type glass membrane supports more stable measurement in high-pH conditions by helping reduce alkaline error. The open junction and polymer electrolyte format are useful where sample contact and reduced clogging risk are important during routine measurement.
The integrated temperature sensor supports automatic temperature compensation when connected to a compatible meter. This makes the electrode practical for users who need pH and temperature-linked measurement from one compatible electrode setup.
Users should confirm the meter model, 8-pin connector compatibility, sample pH, salinity level, cleaning routine and storage requirements before use. Strong alkaline and high-salinity samples should be handled according to the laboratory’s approved method and safety procedure.
LabChoice Australia supplies non-refillable pH / temperature electrodes for schools, universities, water-quality professionals, research laboratories and testing facilities requiring specialised pH measurement for strong alkaline, high-salinity and general water solution applications.
Features
- Non-refillable pH / temperature electrode format
- Designed for strong alkaline solution measurement
- Suitable for high-salinity solutions above 5000 ppm
- Also suitable for general water solution measurement
- pH range listed as 0–14 pH
- Strong alkali working range listed as pH 10–14
- HA-type glass membrane
- Designed to minimise alkaline error
- Open junction design
- Polymer electrolyte reference system
- Silver Ion Trap reference system
- Ag⁺-free reference environment
- Sturdy glass membrane listed as 10 times stronger than traditional glass membranes
- Built-in temperature sensor
- Supports automatic temperature compensation on compatible meters
- Meter compatibility, connector type, sample alkalinity, salinity level, cleaning method and storage procedure should be confirmed before ordering
Warranty
The electrode is covered for defects in material and workmanship for six months from delivery, subject to the manufacturer’s warranty terms.
The limited warranty does not cover issues caused by accidental damage, improper use, normal wear and tear, transport, storage, failure to follow product instructions, unauthorised maintenance, unauthorised modification, unauthorised repair, incompatible use with other products or materials, abuse, accidents or external causes beyond reasonable control.
| Specification | Details |
|---|---|
| Range | 0-14 pH |
| Temp. Range | 0 to 100°C |
| Membrane Type | HA |
| Membrane Shape | Hemispherical |
| Membrane Impedance | <500MΩ |
| Housing Material | Lead-free glass |
| Temp. Sensor | 30KΩ NTC |
| Junction | Open |
| Reference System | Silver Ion Trap |
| Electrolyte | Polymer |
| Length | 120mm |
| Diameter | 12mm |
| Connector | 8-pin |
| Cable | 3 Ft |
Tube Holding Rod for Vortex Mixture
AUD 111.50(Ex GST)
Snap Ring Chromatography Vials, BORO 3.3
From AUD 21.50 (Ex GST)
Lab Coat, Full Sleeve Protective 100% Cotton – Small, Medium, Large
From AUD 30.00 (Ex GST)
LCD Digital Vortex Mixer Up to 3000 rpm, Brushless DC Motor
Magnetic Stirrer, Square 7 Inch Glass Ceramic Plate for 10 L Mixing
AUD 775.50(Ex GST)
Copper Gauze Wire Mesh, 40 Mesh for Electrolysis Experiments
AUD 59.90(Ex GST)
Stainless Steel Trulla Laboratory Spatula, 195 mm, Each
AUD 6.50(Ex GST)
USB Mass Sensor SUGU-M, 520 g Capacity
AUD 415.00(Ex GST)
You May Also Need
Calcium Ion Sensor, Replacement Sensor with 0.1 to 5.0 mmol/L Range
AUD 528.00(Ex GST)
Fluoride Sensor, Replacement Sensor with 0.3 mL Direct Measurement
AUD 227.70(Ex GST)
Pocket Ionized Calcium Meter, Cow Side Blood Testing with 0.3 mL Sample Volume
AUD 2,183.50(Ex GST)
Pocket Nitrate Ion Meter, 0.3 mL Sample Testing with Up to 2 Calibration Points
AUD 1,314.50(Ex GST)
Pocket ORP and Eh Meter, 0.3 mL Sample Testing with Backlit LCD
AUD 478.50(Ex GST)
Save 10%
Pocket Testers for Portable Water Quality Testing
From AUD 290.50 (Ex GST)
Save 10%
Pocket Testers with Bluetooth for Portable pH, ORP and Water Testing
From AUD 397.50 (Ex GST)
Pocket Water Quality Meter, Single-Drop On-Site Testing
AUD 330.00(Ex GST)
Save 10%
Portable Multi-Parameter Meters for pH, Conductivity and Dissolved Oxygen Testing
From AUD 1,723.50 (Ex GST)
Potassium Ion Sensor, Replacement Sensor with 4 to 9900 ppm Range
AUD 227.70(Ex GST)
Sodium Ion Electrode, Replacement Sensor with 2 to 9900 ppm Range
AUD 227.70(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab