Weight Set on Tray, Mild Steel and Brass, 10 g to 1990 g
AUD 84.90(Ex GST)
AUD 84.90(Ex GST)
- Weight set supplied on moulded tray
- Includes mild steel and brass weights
- Provides weighing range from 10 g to 1990 g
- Brass weights include 2 × 100 g, 1 × 50 g, 1 × 20 g and 2 × 10 g
- Steel weights include 1 × 1 kg, 1 × 500 g and 1 × 200 g
- Total combined weight listed as 1990 g
- Suitable for weighing, mass comparison and classroom balance activities
- Useful for school, university and teaching laboratory use
- Tray dimensions listed as approximately 240 × 110 mm
- Practical storage tray helps keep weights organised
- Not supplied as a certified calibration weight set unless specified
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Weight Set on Tray, Mild Steel and Brass, 10 g to 1990 g, also known as a laboratory mass set, is designed for weighing activities, mass comparison and educational balance experiments. This set contains a combination of mild steel and brass weights, allowing users to build mass values across the listed range from 10 g to 1990 g. The brass weights include 2 × 100 g, 1 × 50 g, 1 × 20 g and 2 × 10 g. The steel weights include 1 × 1 kg, 1 × 500 g and 1 × 200 g. Together, the included weights provide a total combined mass of 1990 g, supporting routine classroom demonstrations and general laboratory weighing activities.
The weights are housed in a moulded tray, helping keep the individual pieces organised, accessible and easier to store between uses. The tray dimensions are listed as approximately 240 × 110 mm, providing a compact storage format for laboratory benches, preparation rooms and classroom equipment cupboards. This set is suitable for school science laboratories, university teaching laboratories, physics classrooms and general educational settings requiring practical masses for balance and measurement work. Users should confirm the required mass range, weight material, tray size and accuracy requirement before ordering or use.
This set is not supplied as a certified calibration weight set unless specified separately, and should be used according to the approved laboratory or educational method. Weights should be handled carefully to avoid dropping them onto balances, glassware, benches or feet. Small weights should be kept away from young children and should not be placed in the mouth. This product is intended for laboratory or educational settings only and should be used under appropriate teacher or laboratory supervision. This item is supplied as the weight set on moulded tray only. Balance, scale, force apparatus, weighing paper, calibration certificate and additional accessories are not included unless specified separately.
LabChoice Australia supplies Weight Sets on Trays for school science laboratories, physics classrooms, university teaching laboratories and STEM programs requiring practical masses for weighing, balance and measurement experiments.
Straight Vacuum Adapter BORO 3.3 Glass Laboratory Grade
From AUD 28.50 (Ex GST)
9 V Battery Power Supply in Case with Banana Sockets
AUD 26.50(Ex GST)
Biological Larynx, Heart and Lung Model on Stand
AUD 168.50(Ex GST)
Hybridisation Oven Platform
From AUD 1,366.00 (Ex GST)
Air Track Foot, Laboratory Track Support Unit
From AUD 1.90 (Ex GST)
CO₂ Orbital Shaker Aluminium Platform
AUD 341.90(Ex GST)
Save 10%
Pocket Testers with Bluetooth for Portable pH, ORP and Water Testing
From AUD 397.50 (Ex GST)
Nitrate Ion Standard Solution, 150 ppm Calibration Solution
AUD 110.00(Ex GST)
You May Also Need
Adam ATP2 Printer Paper Rolls, 10 Pack
AUD 220.50(Ex GST)
Adam ATP2 Thermal Printer for Balances and Scales
AUD 740.00(Ex GST)
Adam Highland HCB Portable Precision Balances
From AUD 665.00 (Ex GST)
Adam Lockable Hard Carrying Cases for Balances and Scales
From AUD 245.50 (Ex GST)
Adam Luna LPB Precision Balances for Precision Lab Weighing
From AUD 1,695.00 (Ex GST)
Adam Luna LTB/LBB Toploading Precision Balances for Lab Weighing
From AUD 1,485.00 (Ex GST)
Adam PMB Moisture Analyser for Laboratory Moisture Testing
From AUD 2,960.00 (Ex GST)
Brass Slotted Spare Weights, Economy, 50 g and 100 g
From AUD 6.50 (Ex GST)
Brass Slotted Weight Sets with Carriers, 10 g, 50 g and 100 g
From AUD 31.50 (Ex GST)
Double Hooked Weight Calibration Set, 10 g to 1000 g
AUD 124.50(Ex GST)
Hexagonal Cast Iron Weights with Ring, Durable Laboratory Weight Range
From AUD 6.50 (Ex GST)
Hooked Weight Set, 50 g × 10 Pieces, Double Hooked, in Case
AUD 37.50(Ex GST)
OIML Calibration Weight Sets M1 Capacity upto 1mg to 1g
From AUD 103.50 (Ex GST)
OIML E2 Calibration Weights, 1 mg to 20 kg
From AUD 46.00 (Ex GST)
Polystyrene Weighing Boats, Non Graduated Laboratory Transfer Range
From AUD 13.90 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
LATEST PRODUCTS
Air Table Pivot Pin for Centre of Table
AUD 9.50(Ex GST)
Air Table Puck Joining Strip with Pulley Pivot
AUD 39.50(Ex GST)
Mechanical Quadruple Beam Balance, 311 g × 0.01 g
AUD 224.50(Ex GST)
TOP RATED PRODUCTS
Air Table Pivot Pin for Centre of Table
AUD 9.50(Ex GST)
Air Table Puck Joining Strip with Pulley Pivot
AUD 39.50(Ex GST)
Mechanical Quadruple Beam Balance, 311 g × 0.01 g
AUD 224.50(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab