E
x
p
l
o
r
e
M
o
r
e
:
Plasticware
Materials: Polypropylene
Polypropylene Screw Caps for Thermometer Inlet Adapters
- Replacement plastic screw caps for thermometer inlet adapters
- Compatible with 14/20, 19/22 and 24/40 thermometer inlet adapters
- One cap size listed to fit all stated adapter sizes
- Made from durable polypropylene, also known as PP
- Suitable for standard laboratory applications
- Available in 3 pack, 5 pack and 10 pack options
- Useful for replacement, stocking and routine laboratory maintenance
- Not intended for high-temperature use
- Recommended long-term operating range is below 80 to 100°C
- Confirm adapter fit and temperature conditions before use
- Caps only, thermometer inlet adapters are not included
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Polypropylene Screw Caps for Thermometer Inlet Adapters, also known as PP replacement caps for thermometer adapter assemblies, are designed for routine laboratory replacement, maintenance and spare part stocking. These screw caps are listed as a universal fit for compatible 14/20, 19/22 and 24/40 thermometer inlet adapters, helping laboratories keep replacement caps available for commonly used glassware adapter sizes. The caps are made from polypropylene (PP), a practical plastic material suitable for standard laboratory applications where compatible chemicals and approved operating conditions are followed.
They are useful in chemistry laboratories, school science laboratories, university teaching laboratories and general laboratory environments using thermometer inlet adapters in compatible glassware setups. Users should confirm the adapter size, cap thread fit, seal requirement, thermometer or probe compatibility, chemical exposure and operating temperature before use. These caps are not intended for high-temperature use. The recommended long-term operating range is below 80 to 100°C, depending on the complete assembly, exposure time and laboratory method.
Do not use with excessive heat, pressure systems, unsupported vacuum setups or incompatible solvents unless the complete adapter assembly has been confirmed as suitable. This product is intended for laboratory or educational settings only and should be used under appropriate teacher or laboratory supervision. This item is supplied as polypropylene screw caps only. Thermometer inlet adapters, thermometers, probes, silicone gaskets, O-rings, glassware, clamps and additional accessories are not included unless specified separately.
LabChoice Australia supplies Plastic Screw Caps and laboratory glassware replacement accessories for school science laboratories, university teaching laboratories, research facilities and general laboratory environments requiring practical spare parts for compatible adapter systems.
| Specification | Details |
|---|---|
| Product | Polypropylene screw caps for thermometer inlet adapters |
| Material | Polypropylene, PP |
| Compatible Adapter Sizes | 14/20, 19/22 and 24/40 |
| Fit Type | One size listed to fit all stated adapter sizes |
| Temperature Guidance | Not for high-temperature use |
| Recommended Long-Term Operating Range | Below 80 to 100°C |
| Application | Replacement caps for compatible thermometer inlet adapter assemblies |
High Power QI Light Source, 12 V × 100 W
AUD 224.50(Ex GST)
PETG Media Bottle with Cap, Gamma Sterile
From AUD 204.50 (Ex GST)
Schlenk Reaction Tube PTFE Stopcock, BORO 3.3
From AUD 110.90 (Ex GST)
Concave Mirrors, 50 mm Diameter Classroom Optics Range
From AUD 3.50 (Ex GST)
Nichrome Resistance Wire, Bare Nickel Chromium Laboratory Reel Range
From AUD 31.50 (Ex GST)
Coriolis Force Experiment Apparatus
AUD 212.00(Ex GST)
Biological Full Size Skeleton Model on Stand with Castors
AUD 671.50(Ex GST)
Rock Mineral and Fossil Specimens
From AUD 83.50 (Ex GST)
Single Range Student Volt Meters, AC and DC Voltage
From AUD 43.90 (Ex GST)
You May Also Need
Beaker Polypropylene, Autoclavable, Excellent Clarity & Chemical Resistance
From AUD 2.50 (Ex GST)
Burettes, Plastic (TPX), Lightweight, Durable Polymethyl Methacrylate Construction
From AUD 28.50 (Ex GST)
Kipps Gas Generator Apparatus, Polyethylene
From AUD 59.90 (Ex GST)
Measuring Cylinder, Polypropylene, Tough, Lightweight & Reusable
From AUD 2.00 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Polypropylene Aspirator Bottles with Stopcock, 2 L to 20 L
From AUD 64.90 (Ex GST)
Polypropylene Draining Baskets, Autoclavable, With or Without Lid
From AUD 9.90 (Ex GST)
PTFE Cross Stir Bar 38 x 38 mm, Stable General Purpose Stirring
AUD 13.90(Ex GST)
PTFE Oval Stir Bars, For Round Bottom Flasks, L10 to L40 Sizes
From AUD 4.50 (Ex GST)
Separatory Funnels, Polypropylene, Durable, Easy-Pour with Stopcock Control, High Quality
From AUD 19.50 (Ex GST)
Test Tube Rack & Drain, Open Rack Design
From AUD 25.90 (Ex GST)
Vacuum Desiccator Transparent Polycarbonate, Durable, Clear & Airtight
From AUD 133.00 (Ex GST)
Wash Bottle with Flexible Straw, Leakproof, Material LDPE, High Quality - Each
From AUD 2.30 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
LATEST PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab