Bottle-Top Dispenser Premium Quality with Glass/PTFE Piston
- Adjustable bottle-top dispenser supports controlled routine reagent handling
- High chemical compatibility from inert materials with glass/PTFE piston construction
- Fully autoclavable at 121°C to support sterile laboratory workflows
- Easy to disassemble and clean for periodic maintenance
- Designed for repeatable liquid dispensing directly from compatible reagent bottles
- Suitable for chemical-resistant dispensing across routine laboratory applications
- Supports accurate reagent transfer for analytical, research and quality-control workflows
- Description
Description
The Premium Bottle-Top Dispenser, also known as a laboratory bottle-mounted liquid dispenser, is designed for controlled reagent dispensing in chemical, pharmaceutical, biotechnology, clinical, food testing, environmental, quality-control and research laboratories. It supports safe and repeatable liquid handling directly from compatible reagent bottles.
This bottle-top dispenser provides a practical solution for routine reagent transfer, solution preparation, buffer dispensing, media preparation, analytical workflows and general laboratory liquid handling. Its adjustable dispensing design helps laboratories perform repeated dispensing tasks with better control and consistency.
The dispenser is built with high chemical compatibility in mind, using inert materials and a glass/PTFE piston construction. This supports use with a broad range of compatible laboratory reagents where chemical resistance, clean dispensing and controlled liquid delivery are important.
The unit is fully autoclavable at 121°C, supporting sterile workflows and routine contamination-control procedures. This makes it suitable for laboratories that require clean dispensing equipment for repeated use in regulated, research or quality-control environments.
Easy disassembly and cleaning support periodic maintenance, helping laboratories keep the dispenser ready for daily operation. This practical design is useful in busy laboratories where dispensing equipment must be maintained regularly to support reliable performance.
The dispenser supports accurate and repeatable liquid transfer when used with compatible bottles, reagents and validated laboratory procedures. Users should confirm chemical compatibility, bottle fit and operating method before use to ensure safe and suitable performance.
LabChoice Australia supplies this Premium Bottle-Top Dispenser for analytical laboratories, chemical laboratories, pharmaceutical laboratories, biotechnology laboratories, clinical laboratories, food testing laboratories, environmental testing laboratories, industrial QC laboratories, university laboratories and general research facilities. It is suitable for reagent dispensing, solution preparation, buffer handling, media dispensing and routine chemical transfer using compatible bottles and validated laboratory procedures.
| SKU Number | Volume Range | Systematic Error | Graduation | Random Error |
|---|---|---|---|---|
| LC-85-DDISPENSMATE-PRO 1 | 0.5-5mL | ±25μL | ±0.5% | 0.1mL | ±10μL | ±0.2% |
| LC-85-DDISPENSMATE-PRO 2 | 1.0-10mL | ±50μL | ±0.5% | 0.2mL | ±20μL | ±0.2% |
| LC-85-DDISPENSMATE-PRO 3 | 2.5-25mL | ±125μL | ±0.5% | 0.5mL | ±50μL | ±0.2% |
| LC-85-DDISPENSMATE-PRO 4 | 5.0-50mL | ±250μL | ±0.5% | 1.0mL | ±100μL | ±0.2% |
| LC-85-DDISPENSMATE-PRO 5 | 10-100mL | ±500μL | ±0.5% | 2.0mL | ±200μL | ±0.2% |
| LC-85-DDISPENSMATE-PRO 6 | 0.5-5mL | ±25μL | ±0.5% | 0.1mL | ±10μL | ±0.2% |
| LC-85-DDISPENSMATE-PRO 7 | 1.0-10mL | ±50μL | ±0.5% | 0.2mL | ±20μL | ±0.2% |
| LC-85-DDISPENSMATE-PRO 8 | 2.5-25mL | ±125μL | ±0.5% | 0.5mL | ±50μL | ±0.2% |
16 V Belt-Driven Motor/Generator Set
$90.90(Ex GST)
Burette Rotaflow with PTFE Stopcock Class B, BORO 3.3
From $24.90 (Ex GST)
Micro Centrifuge Tubes, Non Sterile Conical Laboratory Type
From $27.50 (Ex GST)
Circuit Board Kit Spare Parts, Replacement Connectors and Circuit Components
From $3.90 (Ex GST)
Pycnometer Density Bottles, Non Calibrated, Borosilicate Glass
From $12.20 (Ex GST)
Navigation Compasses, Plotting Compasses and Class Sets
From $2.50 (Ex GST)
Similar Products
Adjustable Volume Micropipettes, High Accuracy Liquid Handling Type
From $112.50 (Ex GST)
Bench-top Smart Vacuum Aspiration System, 1L (Replaceable Battery Model)
Disposable Plastic Syringes, Luer Slip No Needle Liquid Handling Range
From $14.90 (Ex GST)
Glass Pasteur Pipettes, BORO 3.3 Pack of 250
From $37.50 (Ex GST)
Levo Pipette Controller
From $49.90 (Ex GST)
Pipette Controller, Rechargeable Lightweight Laboratory Pipetting Type
From $496.50 (Ex GST)
Pipette Filler Bulb, Laboratory Grade, Soft, Flexible Rubber for Easy Pipetting
From $2.50 (Ex GST)
Pipette Pump, Ergonomic ABS Design for Accurate Liquid Handling, High Quality
From $19.50 (Ex GST)
SAFEVAC Vacuum Aspiration System, 4L
Serological Pipette, Class A, BORO 3.3 Glass
From $4.90 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, Gravity Filtration Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab