Signal Generators and Wave Study Units
From $384.80 (Ex GST)
- 240V AC signal generators for lab teaching, waveform, frequency, resonance and oscilloscope demonstrations
- Mini-Wave: crystal locked, sine square triangle sawtooth, 0.1 Hz to 100 kHz, 1A limited
- High Power: 0.1 Hz to 100 kHz, 600 ohm and 20 ohm outputs, 0 to 10V peak
- Wave-Lab: dual channels to 40 kHz, add, phase shift, modulate, mic and headphones
- TriMode: plus minus 1.2 to 20V DC 250mA supply, 0.1 to 100 kHz generator, audio amplifier, speaker
- Description
Description
IEC mains powered 240V AC signal generators for laboratory and education use, covering waveform generation for resonance, audio and oscilloscope experiments. Options include Mini-Wave with crystal locked accuracy and up to 1A current limited output, a high power generator with dual impedance outputs, Wave-Lab dual generator for phase shift, modulation and beats up to 40kHz, and TriMode combining regulated DC supply, signal generator, and audio amplifier functions.
Mini-Wave compact digital signal generator providing sine, square, triangle and sawtooth waveforms. Crystal locked, accuracy stated as approximately 0.01 percent and stability stated as perfect. Runs from 240V mains and provides adjustable output of 15V peak to peak or 5V AC RMS. Output can supply up to 1 amp into the load and is current limited against overload. IEC quick set system permits fast setting of preset frequency, resolution is 0.1Hz up to 10kHz, and from 10kHz up to 100kHz resolution is 1Hz. Used for experiments using Kundt’s apparatus, audio experiments, or resonance experiments using inductance and capacitance, and can be used to demonstrate oscilloscope functions.The large output power permits the running of very large speakers or vibraters, such as Melde-s Apparatus.
IEC high power signal generator in small housing with sloping front panel, described as popular in schools and universities. High current output allows running large speakers and other mechanical devices directly without an amplifier. Range 0.1Hz to 100kHz over six ranges by graduated knob. Output 1: 600 ohm impedance, 0 to 10V peak. Output 2: 20 ohm impedance, 0 to 10V peak, output current limited at 0.5A. Selectable waveforms are sine, triangular, square with plus minus excursion, and square with plus excursion only.
IEC digital Wave-Lab dual wave signal generator for study of wave theory. Microprocessor generates two sets of very accurate and stable frequencies up to 40kHz that can be added to one another, exactly shifted in phase relative to one another, or modulated by one another. Waveforms can be selected as sine, triangular or sawtooth. High power amplifiers permit driving large speakers or headphones for private listening. An oscilloscope can be used to view waveforms and effects, and harmonics, beat frequencies and other phenomena can be studied. Output power is digitally controlled and a keyboard system allows any frequency to be entered. External signals can be applied and a microphone and headphones are included in the kit.A pair of suitable wide range speakers is available. See LC-80-LB2065-001
IEC TriMode signal generator remodelled and upgraded, described as three instruments in one for electronic experiments. Provides a metered and regulated ±1.2 to 20V DC power supply at 250mA output. Provides a high power signal generator from 0.1 to 100kHz. Provides an audio amplifier with high and low sensitivity inputs, oscilloscope output and internal speaker.The signal generator has a specification similar to LC-80-LB3754-001 with the same waveforms and the same high power output of 0.5A. This instrument is excellent value for money.
Similar Products
Expansion Adapter, BORO 3.3 Glass
From $19.90 (Ex GST)
Laboratory Power Supplies and Modules, Multi Function Power Module
From $21.00 (Ex GST)
Penny Head Ground Glass Stopper, High Quality Borosilicate Glass
From $2.00 (Ex GST)
Air Track Systems, Low Friction Linear Motion Type
From $200.00 (Ex GST)
ASEP Powder-Coated Stream Tray
$218.40(Ex GST)
Magnetic Stirrer
From $410.00 (Ex GST)
Transformer 240V AC to 12V AC 12A ,Triple Output Terminals
$219.50(Ex GST)
Digital AC/DC Multimeters, Portable Lab Use Type
From $34.00 (Ex GST)
Digital DC Meters Ammeter and Voltmeter, Dual Display Type
From $119.00 (Ex GST)
Electric Clinostat on Stand, 4 rev/hour, 240 V AC
$176.00(Ex GST)
Fine-Grade Copper Mesh Sheet, 150 × 150 mm
$33.00(Ex GST)
High-Sensitivity Digital Electrometer for Low-Charge Measurement
$423.00(Ex GST)
Laboratory Amplifiers
From $96.00 (Ex GST)
Laboratory Teaching Switches
From $25.00 (Ex GST)
Loudspeakers in Protective Housing, Enclosed Laboratory Speaker
From $63.00 (Ex GST)
Motor Drive Unit with Pulley, Variable Speed Laboratory Unit
From $176.00 (Ex GST)
Simple Clinometer (Inclinometer) for Angle Measurement
$55.00(Ex GST)
Timers and Counters
From $269.40 (Ex GST)
Transformer 240V AC to 12V AC 12A ,Triple Output Terminals
$219.50(Ex GST)
Universal Alloy Bench Clamp for Rods up to 13 mm Diameter
$28.00(Ex GST)
Vacuum Base Surface Plate for Demonstrations ,Dia. 200 mm
$223.00(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Boss Head Clamp for Lab Stands, Powder Coated, Heavy-Duty
From $6.50 (Ex GST)
LATEST PRODUCTS
Siren Disc, Lab Sound Apparatus
From $7.50 (Ex GST)
TOP RATED PRODUCTS
Siren Disc, Lab Sound Apparatus
From $7.50 (Ex GST)
Our Reviews
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab