E
x
p
l
o
r
e
M
o
r
e
:
Electrochemistry Meters & Analysers
pH Conductivity Meter Kit with ORP, Ion, TDS, Salinity and Temperature, 2 Channel Colour Touch Screen
AUD 3,755.00(Ex GST)
AUD 3,755.00(Ex GST)
- pH conductivity meter kit for pH, conductivity, resistivity, salinity, TDS, ORP, ion and temperature measurement workflows
- Includes 2 channel colour touch screen meter, electrode stand, 9615S-10D pH/temp electrode and 3552-10D conductivity/temp electrode
- Includes pH calibration solutions, conductivity calibration solutions and pH electrode filling solution
- Two channels can be displayed simultaneously for flexible multi-parameter measurement viewing
- Digital memory records up to 2000 measurement data sets
- Suitable for laboratories, pharmaceutical water testing, environmental testing, industrial QC and research workflows
[request_quote_button]
- Description
- Datasheets & Manuals
Description
pH Conductivity Meter Kit with ORP, Ion, TDS, Salinity and Temperature, 2 Channel Colour Touch Screen, F-74A-S, also known as a multi-parameter laboratory water quality meter kit, is designed for pH, conductivity, resistivity, salinity, TDS, ORP, ion and temperature measurement workflows in laboratories, pharmaceutical testing, environmental monitoring, industrial QC and research environments. This 2 channel colour touch screen meter set allows two channels to be displayed simultaneously, helping users monitor multiple measurement channels more clearly during routine laboratory operation. The colour touch screen interface supports clear value display, function menu navigation and practical bench workflow control.
The kit includes 2 channel colour touch screen meter, electrode stand, 9615S-10D pH/temp ToupH glass refillable electrode, 3552-10D conductivity/temp electrode, pH calibration solutions, conductivity calibration solutions and pH electrode filling solution.
The supplied meter set is listed as F-74A-S pH/COND/RES/SAL/TDS/ORP/ION/Temp Meter Set, 2 channel with colour touch screen. These inclusions support pH, conductivity, salinity, TDS, resistivity and temperature measurement setup, subject to normal calibration, electrode care and laboratory operating procedures.
Important Note: ORP electrode is not included. ORP electrode 9300-10D must be ordered separately when ORP measurement is required. Ion electrode requirements should also be confirmed separately before ordering if ion measurement will be used.
Users can switch between digital real-time graphs and analogue displays during measurement. The meter also provides on-screen support through an electronic user guide with colour pictures, including a problem solver guide for calibration and measurement. The meter supports easy navigation for main unit and electrode inspections, two-channel simultaneous display, periodic inspection mode for JIS, Pharmacopeias and Digital Simulator workflows, and customisable auto-hold function for calibration and measurement. The product information lists support for various country pharmaceutical pure water guidelines. Pharmaceutical, GLP/GMP, FDA 21 CFR Part 11 or regulatory documentation requirements should be confirmed before ordering, especially where formal compliance records are required.
Data and connectivity functions include digital memory for up to 2000 measurement data sets, USB-PC communication and USB memory support. The meter also supports simultaneous connection to GLP/GMP compatible equipment and PC for connected laboratory workflows. Multi-language support includes Japanese, English, Chinese and Korean. FDA 21 CFR Part 11 option is noted as available by quotation, so software configuration and regulatory workflow requirements should be confirmed before purchase.
LabChoice Australia supplies this pH Conductivity Meter Kit with ORP, Ion, TDS, Salinity and Temperature, 2 Channel Colour Touch Screen, F-74A-S, for schools, universities, pharmaceutical laboratories, environmental testing facilities, industrial water testing labs and research environments requiring multi-parameter measurement, two-channel operation, colour touch screen control, data recording and connectivity support.
Features
- 2 channel colour touch screen meter design
- Two channels can be displayed simultaneously
- Large colour touch screen panel for clear value display and function menu navigation
- Switches between digital real-time graphs and analogue displays during measurement
- Full on-screen electronic user guide with colour pictures
- Problem solver guide for calibration and measurement support
- Easy navigation for main unit and electrode inspections
- Periodic inspection mode: JIS, Pharmacopeias and Digital Simulator
- Support listed for various country pharmaceutical pure water guidelines
- Customisable auto-hold function for calibration and measurement
- Simultaneous connection to GLP/GMP compatible equipment and PC
- Digital memory records up to 2000 measurement data sets
- USB-PC communication support
- USB memory support
- Multi-language support: Japanese, English, Chinese and Korean
- FDA 21 CFR Part 11 option noted, quotation required
- Electrode stand included
- 9615S-10D pH/temp glass refillable electrode included
- 3552-10D conductivity/temp electrode included
- pH 4.01, pH 7.00 and pH 10.01 calibration solutions included
- Conductivity calibration solutions included
- pH electrode filling solution included
- ORP 9300-10D electrode must be ordered separately when ORP measurement is required
| Specification | Details |
|---|---|
| pH – Measurement method | Glass electorode method |
| pH – Measurement range | pH 0.000～14.000 |
| pH – Display range | pH -2.000～20.000 |
| pH – Resolution | 0.01/0.001 pH |
| pH – Auto range select | Yes |
| Repeatability | ±0.001 pH±1 digit |
| pH – calibration point | 5 |
| pH – Repeatability check | Yes |
| pH – Alarm limit of calibration | Yes |
| pH – Periodical check | Yes |
| mV(ORP) – Measurement range | ±1999.9 mV |
| mV(ORP) – Resolution | 0.1 mV |
| mV(ORP) – Repeatability | ±0.1 mV±1 digit |
| Temperature – Measurement range | 0.0～100.0℃(-30.0～130.0℃） |
| Temperature – Resolution | 0.1℃ |
| Temperature – Repeatability | ±0.1℃±1 digit |
| ION – Measurement method | Ion electrode method |
| ION – Measurement range | 0.00 μg/L～999 g/L (mol/L) |
| ION – Resolution | Valid numbers 3 digits |
| ION – Repeatability | ±0.5% ±1 digit |
| ION – Periodical check | Yes |
| ION – Calibration curve point | 5 |
| ION – Addition method measurement | Yes |
| Conductivity – Measurement method | 2 AC bipolar method |
| Conductivity – Measurement range(Display range) | Cell constant 100 m-1：0.000 mS/m〜19.99 S/m Cell constant 10 m-1：0.0 μS/m〜1.999 S/m Cell constant 1000 m-1：0.00 mS/m〜199.9 S/m |
| Conductivity – Resolution | 0.05% of full scale |
| Conductivity – Repeatability | ±0.5% ±1 digit |
| Conductivity – Change unit | Yes |
| Conductivity – Distilled water temperature conversion | Yes |
| Conductivity – Periodical check | Yes |
| Conductivity – JP/EP/USP/CP Pharmaceutical water aplication | Yes |
| Salinity – Measurement method | Conversion from conductivity value |
| Salinity – Measurement range(Display range) | 0.00～80.00 PPT (0.000%～8.000%) |
| Salinity – Resolution | 0.01 PPT (0.001%) |
| Salinity – Salt concentration calibration | Yes |
| Resistivity – Measurement method | Conversion from conductivity value |
| Resistivity – Measurement range (Display range) | Cell constant 100 m-1：0.00 Ω・m〜199.9 kΩ・m Cell constant 10 m-1：0.0 Ω・m〜1.999 MΩ・m Cell constant 1000 m-1：0.000 Ω・m〜19.99 kΩ・m |
| Resistivity – Repeatability | ±0.5%F.S.±1 digit |
| Resistivity – Resolution | 0.05% F.S. |
| TDS – Measurement method | Conversion from conductivity value |
| TDS – Measurement range (Display range) | 0.01 mg/L ～1000 g/L |
| TDS – Resolution | 0.01 mg/L |
| Input/output – Input(CH) | 2 |
| Input/output – USB peripherals (Communication with PC)*1 | Yes |
| Input/output – USB host（USB memory) | Yes |
| Input/output – RS-232C(Printer/PC) | Yes |
| Input/output – Analog out put | Yes |
| Data – Memory number | 2,000 |
| Data – Interval memory | Yes |
| Data – ID input | Yes |
| Data – Data search | Yes |
| Display – Display | Color graphic LCD with capacitive Touch Panel |
| Display – Dual component display | Yes |
| Display – Multilanguage display | Japanese/English/Chinese/Korean |
| Function – Navigation function | Yes |
| Function – User gide | Yes |
| Function – Graf display | Yes |
| Function – Printer connectivity（GLP/GMP） | Yes |
| Function – Custom printing function | Yes |
| Function – temperature compensation（Auto/manual) | Yes |
| Function – AutoHold function | Yes |
| Function – AutoHold setting | Yes |
| Function – Stability function (pH/ION) | Yes |
| Function – Register operator | Yes |
| Function – Security(pass word） | Yes |
| Function – Version up function | Yes |
| Ambient temperature | 0 ℃ ～ 45℃ |
| Power | AC adaptor 100 ～ 240 V 50/60 Hz |
| Demensions | 170(W)×174(D)×73(H)mm(Excluding electrode stand and AC adaptor) |
| Power consumption | Approx. 9.8 VA |
| Mass of main unit | Approx .700 g |
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Laboratory Tubing for Bunsen Burner, Vacuum and Pressure
From AUD 4.50 (Ex GST)
CO₂ Orbital Shaker Aluminium Platform
AUD 341.90(Ex GST)
Stoppers, Polypropylene, Reusable, Lab Grade Quality, High Quality
From AUD 2.20 (Ex GST)
Dimroth Condenser For Soxhlet Extraction and Apparatus BORO 3.3 Glass
From AUD 129.90 (Ex GST)
Fluoride Sensor, Replacement Sensor with 0.3 mL Direct Measurement
AUD 227.70(Ex GST)
Thistle Funnel, BORO 3.3 Glass
AUD 8.40(Ex GST)
Electronics and Photonics Kit, Advanced Classroom Demonstration Kit
From AUD 46.50 (Ex GST)
You May Also Need
Save 10%
Benchtop Touch Screen Multi-Parameter Meter for pH and Conductivity Testing
From AUD 3,146.90 (Ex GST)
Conductivity Sensor, 0 µS/cm to 199.9 mS/cm Measurement Range
AUD 143.00(Ex GST)
Fluoride Sensor, Replacement Sensor with 0.3 mL Direct Measurement
AUD 227.70(Ex GST)
Multi Function Soil Meters with Stem Probes
From AUD 24.90 (Ex GST)
Pocket Nitrate Ion Meter, 0.3 mL Sample Testing with Up to 2 Calibration Points
AUD 1,314.50(Ex GST)
Pocket ORP and Eh Meter, 0.3 mL Sample Testing with Backlit LCD
AUD 478.50(Ex GST)
Save 10%
Portable Multi-Parameter Meters for pH, Conductivity and Dissolved Oxygen Testing
From AUD 1,723.50 (Ex GST)
Save 10%
Portable Single Parameters for pH, ORP, Conductivity and DO Testing
From AUD 1,435.50 (Ex GST)
Salt EC Sensor, 0.12 mL Sample Testing with Ti/Pt Black Cell
AUD 143.00(Ex GST)
Salt Electrode, Replacement Sensor with 0.01 to 25% Salt Range
AUD 227.70(Ex GST)
Sodium Ion Electrode, Replacement Sensor with 2 to 9900 ppm Range
AUD 227.70(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab