E
x
p
l
o
r
e
M
o
r
e
:
Electrochemistry Meters & Analysers
pH Meter Kit with ORP, Ion and Temperature, Colour Touch Screen
AUD 1,975.00(Ex GST)
AUD 1,975.00(Ex GST)
- pH meter kit for pH, ORP, ion and temperature measurement workflows
- Includes colour touch screen meter, electrode stand, 9615S-10D pH/temp glass refillable electrode, pH calibration solutions and pH electrode filling solution
- pH range is -2.000 to 20.000 pH for advanced laboratory pH measurement workflows
- Supplied as F-72A-S pH/ORP/ION/Temp meter set with colour touch screen
- Digital memory records up to 2000 measurement data sets
- Suitable for laboratories, research, education, quality control and routine pH/ORP/ion measurement workflows
[request_quote_button]
- Description
- Datasheets & Manuals
Description
pH Meter Kit with ORP, Ion and Temperature, pH Range -2.000 to 20.000 pH, Colour Touch Screen, F-72A-S, also known as a laboratory pH ORP ion meter kit, is designed for pH, ORP, ion and temperature measurement workflows in laboratories, research facilities, education settings and quality control environments. This colour touch screen meter set supports pH measurement from -2.000 to 20.000 pH. The wider pH range supports advanced laboratory testing where acidic, neutral and alkaline samples may need to be measured with a suitable electrode, calibration setup and operating procedure.
The kit includes colour touch screen meter, electrode stand, 9615S-10D pH/temp ToupH glass refillable electrode, pH calibration solutions and pH electrode filling solution. The supplied meter set is listed as F-72A-S pH/ORP/ION/Temp meter set with colour touch screen.
Included solutions are listed as pH 4.01, pH 7.00, pH 10.01 buffers and 3.33M KCl reference electrolyte, 502-S. These inclusions support pH electrode calibration and routine pH measurement setup, subject to normal calibration, electrode care and laboratory operating procedures.
Important Note: ORP electrode is not included. ORP electrode 9300-10D must be ordered separately when ORP measurement is required. Ion electrode requirements should also be confirmed separately before ordering if ion measurement will be used.
Users can switch between digital real-time graphs and analogue displays during measurement. The meter also provides on-screen support through an electronic user guide with colour pictures, including a problem solver guide for calibration and measurement. The meter supports easy navigation for main unit and electrode inspections, periodic inspection mode for JIS, Pharmacopeias and Digital Simulator workflows, and a customisable auto-hold function for calibration and measurement.
Data and connectivity functions include digital memory for up to 2000 measurement data sets, USB-PC communication and USB memory support. The meter also supports simultaneous connection to GLP/GMP compatible equipment and PC for connected laboratory workflows. Multi-language support includes Japanese, English, Chinese and Korean. FDA 21 CFR Part 11 option is noted as available by quotation, so regulatory software or compliance-related requirements should be confirmed before ordering.
LabChoice Australia supplies this pH Meter Kit with ORP, Ion and Temperature, pH Range -2.000 to 20.000 pH, Colour Touch Screen, F-72A-S, for schools, universities, research laboratories, quality control facilities and routine laboratory environments requiring colour touch screen operation, wide-range pH measurement, optional ORP capability, ion measurement support and data recording features.
Features
- Large colour touch screen panel for clear value display and menu navigation
- Switches between digital real-time graphs and analogue displays during measurement
- Full on-screen electronic user guide with colour pictures
- Problem solver guide for calibration and measurement support
- Easy navigation for main unit and electrode inspections
- Periodic inspection mode: JIS, Pharmacopeias and Digital Simulator
- Customisable auto-hold function for calibration and measurement
- Simultaneous connection to GLP/GMP compatible equipment and PC
- Digital memory records up to 2000 measurement data sets
- USB-PC communication support
- USB memory support
- Multi-language support: Japanese, English, Chinese and Korean
- FDA 21 CFR Part 11 option noted, quotation required
- Electrode stand included
- 9615S-10D pH/temp glass refillable electrode included
- pH 4.01, pH 7.00 and pH 10.01 calibration buffers included
- 3.33M KCl reference electrolyte included
- ORP 9300-10D electrode must be ordered separately when ORP measurement is required
| Specification | Details |
|---|---|
| pH – Measurement method | Glass electorode method |
| pH – Measurement range | pH 0.000～14.000 |
| pH – Display range | pH -2.000～20.000 |
| pH – Resolution | 0.01/0.001 pH |
| pH – Auto range select | Yes |
| Repeatability | ±0.001 pH±1 digit |
| pH – calibration point | 5 |
| pH – Repeatability check | Yes |
| pH – Alarm limit of calibration | Yes |
| pH – Periodical check | Yes |
| mV(ORP) – Periodical check | ±1999.9 mV |
| mV(ORP) – Resolution | 0.1 mV |
| mV(ORP) – Repeatability | ±0.1 mV±1 digit |
| Temperature – Measurement range | 0.0～100.0℃(-30.0～130.0℃） |
| Temperature – Resolution | 0.1℃ |
| Temperature – Repeatability | ±0.1℃±1 digit |
| ION – Measurement method | Ion electrode method |
| ION – Measurement range | 0.00 μg/L～999 g/L (mol/L) |
| ION – Resolution | ±0.5% ±1 digit |
| ION – Periodical check | Yes |
| ION – Calibration curve point | 5 |
| ION – Addition method measurement | Yes |
| Input/output – Input(CH) | 1 |
| Input/output – USB peripherals (Communication with PC)*1 | Yes |
| Input/output – USB host（USB memory) | Yes |
| Input/output – RS-232C(Printer/PC) | Yes |
| Input/output – Analog out put | Yes |
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Oscillator Generator at Very Slow Range & Low-Frequency AC Sine
AUD 174.50(Ex GST)
Student Flame Spectrometer for Emission and Atomic Absorption
AUD 2,025.50(Ex GST)
Biological Blood Cell Teaching Model
AUD 217.90(Ex GST)
Manual Plastic Vacuum Pump Handheld with Built in Pressure Gauge
AUD 65.00(Ex GST)
Bottle-Top Dispenser, Autoclavable at 121°C, Chemical-Resistant
From AUD 265.50 (Ex GST)
LCD Magnetic Hotplate Stirrer with 7 Inch Glass Ceramic Plate, Up to 20 L Capacity
AUD 1,265.00(Ex GST)
LED Digital Magnetic Stirrer, 5 Inch, up to 3 L Capacity
AUD 245.50(Ex GST)
West Condenser BORO 3.3 for Efficient Reflux Cooling
From AUD 44.90 (Ex GST)
STEM Quiz Balls
From AUD 32.50 (Ex GST)
Burettes, Plastic (TPX), Lightweight, Durable Polymethyl Methacrylate Construction
From AUD 28.50 (Ex GST)
You May Also Need
Save 10%
Benchtop Touch Screen Multi-Parameter Meter for pH and Conductivity Testing
From AUD 3,146.90 (Ex GST)
Multi Function Soil Meters with Stem Probes
From AUD 24.90 (Ex GST)
Pocket Nitrate Ion Meter, Single-Drop On-Site Testing
AUD 764.50(Ex GST)
Pocket ORP and Eh Meter, 0.3 mL Sample Testing with Backlit LCD
AUD 478.50(Ex GST)
Save 10%
Pocket Testers for Portable Water Quality Testing
From AUD 290.50 (Ex GST)
Save 10%
Pocket Testers with Bluetooth for Portable pH, ORP and Water Testing
From AUD 397.50 (Ex GST)
Pocket Water Quality Meter, Single-Drop On-Site Testing
AUD 330.00(Ex GST)
Salt EC Sensor, 0.12 mL Sample Testing with Ti/Pt Black Cell
AUD 143.00(Ex GST)
Salt Electrode, Replacement Sensor with 0.01 to 25% Salt Range
AUD 227.70(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
pH Meter Kit with ORP, Ion and Temperature, Colour Touch Screen
AUD 1,975.00(Ex GST)
Turbidity Standard Solution Set, 0.02 to 800 NTU Calibration Standards
AUD 1,410.00(Ex GST)
Portable Turbidity Meter, ISO 7027 Water Testing with 2000 NTU Auto Range
AUD 1,410.00(Ex GST)
TOP RATED PRODUCTS
pH Meter Kit with ORP, Ion and Temperature, Colour Touch Screen
AUD 1,975.00(Ex GST)
Turbidity Standard Solution Set, 0.02 to 800 NTU Calibration Standards
AUD 1,410.00(Ex GST)
Cork Borer Sharpener, Chrome Plated Metal
AUD 22.50(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab