Glass Blowing Tube, BORO 3.3, High-Quality 500 mm Length
From AUD 18.00 (Ex GST)
From AUD 18.00 (Ex GST)
- Borosilicate glass blowing tubes for laboratory and educational use
- BORO 3.3 glass specification as listed in title
- Supplied in 500 mm length as listed
- Pack size listed as 10 pieces
- Approximate length variation listed as ±2 cm
- Available in multiple OD and wall thickness options
- Suitable for compatible glassblowing and glassworking demonstrations
- Useful for heating, shaping, bending and forming practice
- Practical tubing for school, university and laboratory preparation areas
- Confirm OD, wall thickness and length tolerance before ordering
- Heated glass can cause serious burns
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Glass Blowing Tubes, BORO 3.3, 500 mm, also known as borosilicate glass tubing for glassblowing, are designed for compatible laboratory glassworking, shaping and educational demonstration work. These tubes are made from borosilicate glass, with BORO 3.3 listed in the product title. The tubing is suitable for approved glassblowing and glass manipulation procedures where compatible laboratory glass is required. Each pack is listed as 10 pieces, with each tube supplied in a 500 mm length. The lengths are approximate, with a listed variation of ±2 cm, so users should confirm suitability where exact finished length is important.
The range includes multiple outside diameter and wall thickness options, allowing users to choose the correct tubing size for heating, bending, forming, joining or general glassworking practice. This product is suitable for school science laboratories, university teaching laboratories, glassworking demonstrations, research facilities and laboratory preparation areas requiring borosilicate glass tubing. Users should confirm tube OD, wall thickness, heating method, flame compatibility, cutting method, annealing requirements and glassworking procedure before use. Glassblowing involves high temperatures, flame and hot glass. Heated glass may look cool but can still cause severe burns. Use suitable eye protection, heat-resistant tools, ventilation and approved glassworking procedures.
Do not use with hazardous fumes, incompatible chemicals or pressure applications unless the complete setup has been assessed and approved. This product is intended for laboratory or educational settings only and should be used under appropriate supervision. This item is supplied as the selected BORO 3.3 glass blowing tubes, pack of 10 only. Burner, torch, gas supply, annealing equipment, glass cutter, PPE, stands, clamps and additional glassworking accessories are not included unless specified separately.
LabChoice Australia supplies BORO 3.3 Glass Blowing Tubes and laboratory glassware accessories for school science laboratories, university teaching laboratories, research facilities and educational laboratories requiring practical tubing for glassworking and demonstration use.
| Item Code | Size O.D. X WALL THICKNESS (mm) | Length | Pack |
|---|---|---|---|
| LC-07-GBT1721 | 6 X 1.5 | 500 mm | 10 PCS |
| LC-07-GBT1722 | 6 X 1.5 | 500 mm | 20 PCS |
| LC-07-GBT1723 | 8 X 1.5 | 500 mm | 10 PCS |
| LC-07-GBT1724 | 8 X 1.5 | 500 mm | 20 PCS |
| LC-07-GBT1725 | 10 X 1.5 | 500 mm | 10 PCS |
| LC-07-GBT1726 | 10 X 1.5 | 500 mm | 20 PCS |
| LC-07-GBT1727 | 12 X 1.5 | 500 mm | 10 PCS |
| LC-07-GBT1728 | 12 X 1.5 | 500 mm | 20 PCS |
| LC-07-GBT1729 | 14 X 1.5 | 500 mm | 10 PCS |
| LC-07-GBT1730 | 14 X 1.5 | 500 mm | 20 PCS |
| LC-07-GBT1731 | 16 X 2.8 | 500 mm | 10 PCS |
| LC-07-GBT1732 | 16 X 2.8 | 500 mm | 20 PCS |
| LC-07-GBT1733 | 18 X 1.8 | 500 mm | 10 PCS |
| LC-07-GBT1734 | 18 X 1.8 | 500 mm | 20 PCS |
| LC-07-GBT1735 | 22 X 1.8 | 500 mm | 10 PCS |
| LC-07-GBT1736 | 22 X 1.8 | 500 mm | 20 PCS |
| LC-07-GBT1737 | 25 X 1.2 | 500 mm | 10 PCS |
| LC-07-GBT1738 | 25 X 1.2 | 500 mm | 20 PCS |
Magnetic Stirrer IKA Big Squid with Glass Surface, Up to 5 L Capacity
AUD 881.00(Ex GST)
UV LED Torch for Laboratory Inspection and Detection
AUD 24.90(Ex GST)
Magnetic Field Observation Tank
AUD 192.90(Ex GST)
Sodium Ion Standard Solution, 150 ppm Calibration for Pocket Sodium Meters
AUD 110.00(Ex GST)
Cylindrical Dropping Funnel PTFE Stopcock, with Graduation Open Top, BORO 3.3 Glass
From AUD 27.50 (Ex GST)
Erlenmeyer Flask Attachment (100mL-250ml), Operating speed: 0~1500rpm
AUD 73.50(Ex GST)
Pipette Box, Polystyrene, for Adjustable Pipette Storage
AUD 19.90(Ex GST)
Adjustable Speed Tube Rotator for Laboratory Sample Mixing
You May Also Need
Allihn Condenser Soxhlet Extraction BORO 3.3 Glass
From AUD 69.90 (Ex GST)
Boiling Flask Flat Bottom, Socket Joint, Short Neck, Borosilicate Glass (BORO 3.3)
From AUD 8.00 (Ex GST)
Bumper Guard Measuring Cylinder, Shock-Absorbing, Chemical Resistant, Heavy Quality
From AUD 1.00 (Ex GST)
Davies Double Surface Condenser BORO 3.3 for Efficient Reflux
From AUD 64.90 (Ex GST)
Dreschel Head Only, Gas Washing Bottle Head Spare, Borosilicate Glass (BORO 3.3)
From AUD 41.50 (Ex GST)
Glass Low Form Beaker BORO 3.3 Size 5 ML – 10 Pcs/Box
AUD 20.00(Ex GST)
Special Price
Graham Reflux Condenser BORO 3.3 Borosilicate Glass
From AUD 69.90 (Ex GST)
Laboratory Beaker, Low Form, Graduated with Spout, Borosilicate Glass (BORO 3.3)
From AUD 2.00 (Ex GST)
Liebig Condenser with Interchangeable Joint Socket, Borosilicate Glass (BORO 3.3)
From AUD 32.90 (Ex GST)
Pycnometer Density Bottles, Borosilicate Glass
From AUD 11.50 (Ex GST)
Reagent Bottle, Narrow Mouth with Screw Cap, Graduated, Borosilicate Glass (BORO 3.3)
From AUD 5.90 (Ex GST)
Reflux Condenser Angled BORO 3.3 Borosilicate Glass
From AUD 73.90 (Ex GST)
Vigreux Fractionating Distillation Column, Borosilicate Glass (BORO 3.3)
From AUD 37.50 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
Glass Blowing Tube, BORO 3.3, High-Quality 500 mm Length
From AUD 18.00 (Ex GST)
Glass Blowing Tube, BORO 3.3, 10 mm OD with 2.5 mm Thick Wall
From AUD 48.00 (Ex GST)
Polypropylene Rotatable Multi Rack for Laboratory Tubes and Vials
AUD 99.90(Ex GST)
TOP RATED PRODUCTS
Glass Blowing Tube, BORO 3.3, High-Quality 500 mm Length
From AUD 18.00 (Ex GST)
Glass Blowing Tube, BORO 3.3, 10 mm OD with 2.5 mm Thick Wall
From AUD 48.00 (Ex GST)
Polypropylene Rotatable Multi Rack for Laboratory Tubes and Vials
AUD 99.90(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab