Low form Silica Crucibles for Laboratory Heating
From AUD 59.50 (Ex GST)
From AUD 59.50 (Ex GST)
- Low form Silica crucibles for laboratory heating applications
- Also known as fused silica crucibles
- Suitable for compatible high-temperature laboratory workflows
- Useful for ashing, ignition, residue testing and sample preparation
- Silica construction supports good thermal resistance
- Chemically resistant for many compatible laboratory procedures
- Suitable for school, university, research and industrial laboratories
- Available in selected sizes and forms where specified
- Confirm capacity, shape and temperature suitability before ordering
- Lid is not included unless specified separately
- Handle carefully to avoid thermal shock or breakage
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Low form Silica Crucibles, also known as fused silica crucibles, are designed for laboratory heating, ashing and sample preparation workflows where compatible high-temperature labware is required. Silica crucibles are commonly used for heating solid samples, preparing residues, carrying out ignition procedures and supporting analytical sample preparation where suitable chemical and thermal compatibility has been confirmed. The silica construction provides practical resistance to many laboratory heating conditions, making these crucibles useful in chemistry laboratories, teaching laboratories, quality control laboratories and research environments.
These crucibles are suitable for use with compatible furnaces and heating procedures, depending on the selected crucible size, wall thickness, shape and silica grade. Users should confirm the required capacity, crucible form, maximum operating temperature, heating rate, cooling method, sample chemistry and furnace compatibility before ordering or use. Silica crucibles should be heated and cooled gradually to reduce thermal stress. Avoid sudden temperature changes, mechanical shock, dropping, rough handling, contaminated heating surfaces and direct contact with incompatible materials.
Do not use with chemicals, fluxes or sample types that may attack silica unless the method has been assessed and approved by the laboratory. This product is intended for laboratory or educational settings only and should be used under appropriate supervision. This item is supplied as the selected silica crucible only. Lid, furnace, tongs, desiccator, samples, chemicals, PPE and additional laboratory accessories are not included unless specified separately.
LabChoice Australia supplies Silica Crucibles and laboratory heating consumables for school science laboratories, university teaching laboratories, research facilities and industrial laboratories requiring practical vessels for heating, ashing and sample preparation.
| SKU Number | Capacity (ml) | Dia. (mm) | Height (mm) |
|---|---|---|---|
| LC-18-SC1531 | 25 | 47mm | 28mm |
| LC-18-SC1532 | 50 | 57mm | 37mm |
| LC-18-SC1533 | 80 | 67mm | 45mm |
| LC-18-SC1534 | 100 | 71mm | 50mm |
| LC-18-SC1535 | 150 | 82mm | 51mm |
Compound Bar, 2-Metal Riveted, with Wooden Handle
AUD 16.50(Ex GST)
Glass Pocket Thermometer Adapter BORO 3.3 Laboratory Grade
From AUD 12.90 (Ex GST)
Mini Spectral Lamp Power Supply and Holder, Without Lamp
AUD 435.90(Ex GST)
Zoological Frog Dissection Model on Board
AUD 186.90(Ex GST)
Biological Small Skeleton Model, 850 mm on Stand
AUD 124.50(Ex GST)
Percolation for Herbal Alcohol Extract, BORO 3.3 Glass
From AUD 90.90 (Ex GST)
Air Track Flat Loop Spring Holder with Screw and Nut
AUD 7.50(Ex GST)
LCD 15-Channel Magnetic Stirrer, Aluminium Work Plate, up to 0.4 L Capacity
AUD 2,040.00(Ex GST)
You May Also Need
Bottle Top Dispensers, Autoclavable Adjustable Volume ISO 8655 Certified Type
From AUD 518.50 (Ex GST)
Bunsen Burner Spark Lighter Spare Flints, Pack of 20
AUD 12.50(Ex GST)
Clay Pipe Triangle for Bunsen Burner, Ceramic Coated Wire for Stable Heating, High Quality
From AUD 1.90 (Ex GST)
Compact Adjustable Vacuum Pump for Laboratory Filtration
AUD 134.90(Ex GST)
Lab Coat, Full Sleeve Protective 100% Cotton – Small, Medium, Large
From AUD 30.00 (Ex GST)
Polypropylene Coplin Staining Jar with Screw Cap
AUD 5.50(Ex GST)
Polypropylene Laboratory Spatula with Spoon and Shovel Ends
From AUD 1.20 (Ex GST)
Porcelain Crucible Shelf Rack 160 × 100 mm
AUD 18.90(Ex GST)
Porcelain Evaporating Basins, Round Bottom with Spout, 15 mL to 1000 mL
From AUD 2.50 (Ex GST)
Porcelain Streak Plates, Unglazed Mineral Testing Tile Range, White & Black
From AUD 17.50 (Ex GST)
Silicone High Vacuum Grease, 211 Compound, 50 g Pack
AUD 22.90(Ex GST)
Spatula, Stainless Steel Laboratory with Spoon and Shovel Ends
From AUD 4.50 (Ex GST)
Stainless Steel Laboratory Spatula with Plastic Handle, 180 mm, Each
AUD 5.90(Ex GST)
Stainless Steel Nuffield Laboratory Spatula, 140 mm, Each
AUD 4.90(Ex GST)
Test Tube Cleaning Brushes, Nylon Bristles
From AUD 2.50 (Ex GST)
[porto_related_products_slider]
Recently Viewed Products
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
Glass Blowing Tube, BORO 3.3, High-Quality 500 mm Length
From AUD 18.00 (Ex GST)
Glass Blowing Tube, BORO 3.3, 10 mm OD with 2.5 mm Thick Wall
From AUD 48.00 (Ex GST)
Polypropylene Rotatable Multi Rack for Laboratory Tubes and Vials
AUD 99.90(Ex GST)
TOP RATED PRODUCTS
Glass Blowing Tube, BORO 3.3, High-Quality 500 mm Length
From AUD 18.00 (Ex GST)
Glass Blowing Tube, BORO 3.3, 10 mm OD with 2.5 mm Thick Wall
From AUD 48.00 (Ex GST)
Polypropylene Rotatable Multi Rack for Laboratory Tubes and Vials
AUD 99.90(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab