Mechanical Quadruple Beam Balance, 311 g × 0.01 g
AUD 224.50(Ex GST)
AUD 224.50(Ex GST)
- Mechanical beam balance for laboratory and educational use
- Model listed as MB311
- Capacity listed as 311 g
- Division listed as 0.01 g
- Classic mechanical balance design
- High precision readability for classroom weighing activities
- Easy reading beam system for manual mass measurement
- Stainless steel pan diameter listed as 90 mm
- Hanging pan design listed in supplied features
- Balance weight listed as 1.7 kg
- Suitable for school, university and teaching laboratory use
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Mechanical Quadruple Beam Balance, 311 g × 0.01 g, also known as a mechanical beam laboratory balance, is designed for manual weighing activities in laboratory and educational settings. This balance has a listed capacity of 311 g and a division of 0.01 g, supporting practical mass measurement for classroom science, physics, chemistry and general laboratory activities. The model is listed as MB311 and features a classic mechanical balance design suitable for teaching environments where students need to observe and understand manual weighing principles. The balance includes an easy reading beam system for adjusting and reading mass values during approved weighing procedures.
The stainless steel pan has a listed diameter of 90 mm, providing a practical weighing surface for compatible small samples, containers or classroom materials. The supplied features also list a hanging pan design, supporting use in suitable weighing demonstrations where the balance configuration is appropriate. This balance is useful for lessons covering mass measurement, comparison weighing, density experiments, sample preparation, material testing and general laboratory measurement skills. Users should confirm the required capacity, division, beam configuration, pan style and weighing method before ordering or use.
The balance should be placed on a stable, level surface before use. Do not overload the balance or place hot, wet, corrosive, leaking or unstable materials directly onto the pan. This product is intended for laboratory or educational settings only and should be used under appropriate teacher or laboratory supervision. This item is supplied as the mechanical beam balance only. Calibration weights, weighing boats, containers, samples, worksheets and additional accessories are not included unless specified separately.
LabChoice Australia supplies Mechanical Beam Balances for school science laboratories, university teaching laboratories and general educational environments requiring practical equipment for manual weighing and mass measurement activities.
Test Tube Racks, Polypropylene 90 Hole for 13 mm Tubes Laboratory Type
From AUD 8.90 (Ex GST)
Surgical Blades, Laboratory Cutting Blade Range Pack of 100
From AUD 27.50 (Ex GST)
LCD 3D Shaker with Non-Slip Dish Platform, 9° Tilt, 5 kg Load Capacity
AUD 1,489.00(Ex GST)
Double Hooked Weight Calibration Set, 10 g to 1000 g
AUD 124.50(Ex GST)
Air Track Over-Track Photogate with Leg Supports
AUD 170.50(Ex GST)
Magnetic Field, Cavity Type with Iron Bars, 200 x 100mm
AUD 17.50(Ex GST)
LCD Digital Magnetic Stirrer, Round Plate 5 Inch, up to 20 L Capacity
AUD 837.50(Ex GST)
Serological Pipette, Class A, BORO 3.3 Glass
From AUD 4.90 (Ex GST)
Tube Rotator for Sample Blood mixing, 0 to 80rpm
AUD 612.50(Ex GST)
Orbital Shaking Incubator
From AUD 6,639.00 (Ex GST)
You May Also Need
Adam ATP2 Thermal Printer for Balances and Scales
AUD 740.00(Ex GST)
Adam Density Determination Kits for Analytical and Precision Balances
From AUD 1,140.00 (Ex GST)
Adam Highland HCB Portable Precision Balances
From AUD 665.00 (Ex GST)
Adam Luna Analytical Balance, 0.0001g Laboratory Weighing Type
From AUD 2,605.00 (Ex GST)
Adam Luna LPB Precision Balances for Precision Lab Weighing
From AUD 1,695.00 (Ex GST)
Adam PMB Moisture Analyser for Laboratory Moisture Testing
From AUD 2,960.00 (Ex GST)
Adam Polaris PTB/PBB Toploading Precision Balances for Lab Weighing
From AUD 1,615.00 (Ex GST)
Adam Polaris Semi-Micro and Analytical Balances for Precision Lab Weighing
From AUD 3,420.00 (Ex GST)
Brass Slotted Spare Weights, Economy, 50 g and 100 g
From AUD 6.50 (Ex GST)
Brass Slotted Weight Sets with Carriers, 10 g, 50 g and 100 g
From AUD 31.50 (Ex GST)
Double Hooked Weight Calibration Set, 10 g to 1000 g
AUD 124.50(Ex GST)
Hexagonal Cast Iron Weights with Ring, Durable Laboratory Weight Range
From AUD 6.50 (Ex GST)
Mechanical Single Pan Balance, 2610 g × 0.1 g, with Weights
AUD 224.50(Ex GST)
OIML E2 Calibration Weights, 1 mg to 20 kg
From AUD 46.00 (Ex GST)
OIML M1 Cast Iron Weights, 5 kg to 20 kg
From AUD 80.50 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
LATEST PRODUCTS
Air Table Pivot Pin for Centre of Table
AUD 9.50(Ex GST)
Air Table Puck Joining Strip with Pulley Pivot
AUD 39.50(Ex GST)
TOP RATED PRODUCTS
Air Table Pivot Pin for Centre of Table
AUD 9.50(Ex GST)
Air Table Puck Joining Strip with Pulley Pivot
AUD 39.50(Ex GST)
Mechanical Quadruple Beam Balance, 311 g × 0.01 g
AUD 224.50(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab