Stroboscopes
From $83.00 (Ex GST)
- Stroboscopes for non contact motion measurement and apparent freezing of moving objects in teaching and industry
- LED student strobe runs on 12V, silent flash, microprocessor stability, adjustable 1–500 Hz, Hz or RPM display
- Xenon strobe models provide very bright output with 150 mm reflector, adjustable 1–300 Hz, mains sync and external trigger
- Hand disc strobe demonstrates shuttering with adjustable slot counts 1 to 12, compact ABS design for classroom handling
- Motorised disc strobe maintains speed with built in control, supplied discs 4 8 12 slots plus blank disc, runs up to 12V AC/DC
- Description
Description
IEC stroboscope options for classroom and industry, including a low voltage digital LED strobe for personal classroom use, xenon reflector stroboscopes for bright illumination in higher light environments, and mechanical stroboscopes using slotted discs to demonstrate shuttering and apparent motion. Digital models provide frequency adjustment with display in Hz or RPM and support external triggering and mains synchronisation, while disc models demonstrate stroboscopy through adjustable slot counts or motor controlled constant speed.
IEC digital LED stroboscope low voltage miniature unit for personal classroom use where extreme bright flashing of large xenon models is not desirable. Flashing is silent to improve concentration and eliminate noise in the classroom. LEDs provide bright white flash and microprocessor control provides absolute flash accuracy and stability. Frequency adjustable from 1 Hz to 500 Hz. Digital display selectable to show flashes per second in Hz or RPM for rotating devices. Powered by 12V AC plug pack. Can be triggered from an external source or synchronised with 50 Hz mains frequency. Provision for flashing a very small remote LED flash head. Measurements on moving objects can be taken without physical contact and motion can be slowed to a frozen or slowly moving image.
IEC xenon stroboscope model XE used in classroom and industry for many years. Large bright 150 mm diameter reflector throws very bright light on the subject and can be used even when background lighting is bright. Pivoting carry handle can also be used as a tilt support. Frequency adjustable from 1.0 Hz to 300 Hz and digital display indicates either flashes per second in Hz or RPM. Flash can be triggered from an external source and synchronised with mains frequency.The model ‘XEH’ permits the connection of a remote flash torch (LC-80-PA3812-004) or a flash head with 150mmD reflector (LC-80-PA3812-003). Powered from 220/240V AC mains.ee also model ‘XEH’ LC-80-LB3809-001
IEC xenon stroboscope model XEH used mainly in industry for many years. Large bright 150 mm diameter reflector throws very bright light on the subject and can be used even when background lighting is bright. Pivoting carry handle can also be used as a tilt support. Frequency adjustable from 1.0 Hz to 300 Hz and digital display indicates either flashes per second in Hz or RPM. Flash can be triggered from an external source and synchronised with mains frequency. Model XEH permits connection of a remote flash torch (LC-80-PA3812-004) or a flash head with 150 mm diameter reflector(LC-80-PA3812-003). Powered from 220/240V AC mains.See also model ‘XE’ LC-80-LB3808-001
Hand stroboscope teaching device where the eye looks through a narrow slit while a disc with 12 slots is spun by the user’s finger so slot openings pass the stationary slit. Acts as a shutter and the eye sees rapid on off images of a moving object, and at correct disc speed the image appears stationary or slowly moving forwards or backwards. Model LB3851-001 has two discs adjustable to provide 1, 2, 3, 4, 6, or 12 slots in the rotating disc. New design is no longer made from wood and masonite, described as more compact, performs better, made from ABS plastic, with improved slot adjustment method.
IEC motorised stroboscope for teaching stroboscopy, designed to maintain constant speed more reliably than hand driven disc types. Motor driven stroboscope has inbuilt speed control and maintains constant speed reasonably well. Supplied with set of three discs with 4, 8 and 12 slots. Blank disc permits creation of a disc in the classroom. Unit can be supported on a retort stand with a boss head. Runs from either AC or DC up to 12V maximum.
Similar Products
Nylon Air Track End-of-Track Pulley Attachment
$16.60(Ex GST)
Receiver Straight Delivery Adapter, Borosilicate Glass (BORO 3.3)
From $12.50 (Ex GST)
Microscope Glass Slides One Side Frosted, Laboratory Use
From $8.50 (Ex GST)
4 mm Banana Plug Cables, 300 mm Laboratory Lead
From $6.70 (Ex GST)
Digital AC/DC Multimeters, Portable Lab Use Type
From $34.00 (Ex GST)
Glass Low Form Beaker BORO 3.3 Size 50 ML – 6 Pcs/Box
$18.10(Ex GST)
5-Pair Terminal Distribution Board
$104.00(Ex GST)
Air Track and Air Table Spark Generator, 240 V AC Mains
$747.00(Ex GST)
ASEP Metal Rod Set (8 Pieces), 3 mm Diameter
$32.00(Ex GST)
Digital AC Ammeter and Voltmeter, Dual Display Type
From $147.00 (Ex GST)
Digital AC/DC Multimeters, Portable Lab Use Type
From $34.00 (Ex GST)
Digital DC Meters Ammeter and Voltmeter, Dual Display Type
From $119.00 (Ex GST)
Electric Clinostat on Stand, 4 rev/hour, 240 V AC
$176.00(Ex GST)
High-Sensitivity Digital Electrometer for Low-Charge Measurement
$423.00(Ex GST)
Laboratory Power Supplies and Modules, Multi Function Power Module
From $21.00 (Ex GST)
Laboratory Teaching Switches
From $25.00 (Ex GST)
Microscope Lamps, Laboratory Illumination Type
From $57.60 (Ex GST)
Timers and Counters
From $269.40 (Ex GST)
Transformer 240V AC to 12V AC 12A ,Triple Output Terminals
$219.50(Ex GST)
Vacuum Base Surface Plate for Demonstrations ,Dia. 200 mm
$223.00(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Boss Head Clamp for Lab Stands, Powder Coated, Heavy-Duty
From $6.50 (Ex GST)
LATEST PRODUCTS
Siren Disc, Lab Sound Apparatus
From $7.50 (Ex GST)
TOP RATED PRODUCTS
Siren Disc, Lab Sound Apparatus
From $7.50 (Ex GST)
Our Reviews
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab