E
x
p
l
o
r
e
M
o
r
e
:
Electrochemistry Meters & Analysers
pH Meter Kit with Conductivity, ORP, Ion, TDS, Salinity and Temperature, pH Range -2.000 to 20.000 pH, Electrode Stand and Power Adaptor Only
AUD 1,505.00(Ex GST)
AUD 1,505.00(Ex GST)
- pH meter kit for pH, conductivity, ORP, ion, TDS, salinity, resistivity and temperature measurement workflows
- Includes electrode stand and power adaptor only
- pH range is -2.000 to 20.000 pH with 0.1, 0.01 and 0.001 pH resolution options
- Conductivity range supports up to 2.000 S/cm, with TDS, salinity and resistivity measurement functions
- ORP range supports -2000.0 to +2000.0 mV and ion range supports 0.000 μg/L to 9999 g/L
- Suitable for laboratories, environmental testing, industrial water testing, education, research and quality control workflows
[request_quote_button]
- Description
- Datasheets & Manuals
Description
pH Meter Kit with Conductivity, ORP, Ion, TDS, Salinity and Temperature, pH Range -2.000 to 20.000 pH, Electrode Stand and Power Adaptor Only, also known as a multi-parameter water quality meter kit, is designed for pH, conductivity, ORP, ion, TDS, salinity, resistivity and temperature measurement workflows in laboratory, environmental, industrial, education and research settings.
This kit includes electrode stand and power adaptor only. pH electrodes, conductivity electrodes, ORP electrodes, ion selective electrodes, calibration solutions and any additional measurement accessories should be confirmed separately before ordering.
Important Note: ORP and ion electrodes are sold separately. Compatible ORP and ion electrodes should be ordered separately when ORP or ion measurement is required.
This meter supports a pH range from -2.000 to 20.000 pH, with selectable pH resolutions of 0.1, 0.01 and 0.001 pH. It supports USA, NIST, NIST2, DIN and custom pH buffer groups, with up to 6 pH calibration points for controlled pH measurement and calibration workflows. For conductivity measurement, the meter supports a conductivity range up to 2.000 S/cm, auto-ranging S/cm and S/m units, auto and manual conductivity calibration, up to 5 conductivity calibration points, adjustable reference temperature from 15 to 30°C, adjustable temperature coefficient from 0.00 to 10.00% per °C and accepted cell constant from 0.0700 to 13.000.
The meter also supports TDS measurement from 0.01 mg/L to 100 g/L, with pre-programmed TDS curves including Linear, EN27888, 442 and NaCl. Salinity measurement is supported from 0.0 to 100.0 ppt and 0.00 to 10.00%, with pre-programmed NaCl and seawater salinity curves. Resistivity measurement is supported from 0.000 Ω·cm to 20.0 MΩ·cm. ORP measurement is supported from -2000.0 to +2000.0 mV when a compatible ORP electrode is used. Ion measurement is supported from 0.000 μg/L to 9999 g/L with 3 selectable units, up to 5 user-defined ion calibration points, and segment and average slope data after ion calibration.
Temperature measurement is supported from -30.0 to 130.0°C / -22.0 to 266.0°F, with a temperature calibration option. Measurement modes include auto stable, auto hold and real-time operation, while electrode status, temperature and reading stability indicators help users monitor measurement condition during routine laboratory workflows. Data and connectivity functions include memory for up to 2000 data sets with date/time stamp, automatic data logging with adjustable time interval, real-time clock, USB PC communication with complimentary data acquisition software and RS232 printer communication.
The 5-inch digital custom LCD display with backlight supports clear bench operation. The compact meter footprint, adjustable integrated electrode stand, audible key sound feedback and easy-to-use interface help support routine measurement and calibration workflows.
LabChoice Australia supplies this pH Meter Kit with Conductivity, ORP, Ion, TDS, Salinity and Temperature, pH Range -2.000 to 20.000 pH, Electrode Stand and Power Adaptor Only, for schools, universities, environmental testing laboratories, industrial water testing facilities, research laboratories and quality control environments requiring multi-parameter measurement support with data logging and connectivity.
Features
- pH range from -2.000 to 20.000 pH
- pH resolution options of 0.1, 0.01 and 0.001 pH
- USA, NIST, NIST2, DIN and custom pH buffer groups
- Up to 6 pH calibration points
- Offset, segment slope and average slope data after pH calibration
- Adjustable calibration alarm up to 90 days
- ORP range from -2000.0 to +2000.0 mV with ORP calibration option
- Ion range from 0.000 μg/L to 9999 g/L with 3 selectable units
- Up to 5 user-defined ion calibration points
- Segment and average slope data after ion calibration
- Conductivity range up to 2.000 S/cm
- Adjustable reference temperature from 15 to 30°C
- Adjustable temperature coefficient from 0.00 to 10.00% per °C
- Accepts 0.0700 to 13.000 cell constant
- Auto and manual conductivity calibration options
- Up to 5 conductivity calibration points
- Auto-ranging S/cm and S/m conductivity units
- TDS range from 0.01 mg/L to 100 g/L
- Pre-programmed TDS curves: Linear, EN27888, 442 and NaCl
- Linear TDS factor range from 0.40 to 1.00
- Resistivity range from 0.000 Ω·cm to 20.0 MΩ·cm
- Salinity ranges from 0.0 to 100.0 ppt and 0.00 to 10.00%
- Pre-programmed salinity curves: NaCl and seawater
- Temperature range from -30.0 to 130.0°C / -22.0 to 266.0°F
- Temperature calibration option
- Auto stable, auto hold and real-time measurement modes
- Electrode status, temperature and reading stability indicators
- Large memory stores up to 2000 data sets with date/time stamp
- Automatic data logging with adjustable time interval
- Real-time clock supports time-dependent functions
- Adjustable auto shut-off up to 30 minutes
- Password-protected setup mode for security
- Software upgrade capability
- USB PC communication with complimentary data acquisition software
- RS232 printer communication
- 5-inch digital custom LCD display with backlight
- Sleek interface with audible key sound feedback
- Small meter footprint with adjustable integrated electrode stand
- 3 years warranty listed for the meter
| Specification | Details |
|---|---|
| Model | LAQUA-PC2000 pH/ORP/Ion/Conductivity/ Resistivity/TDS/Salinity/Temp (°C/°F) |
| pH Range | -2.000 to 20.000 pH |
| Resolution | 0.1 / 0.01 / 0.001 pH |
| Accuracy | ± 0.003 pH |
| pH Buffer Groups | USA, NIST, NIST2, DIN, Custom |
| Calibration Points | Up to 5 (USA, NIST, NIST2, Custom) / Up to 6 (DIN) |
| ORP Range | ± 2000.0 mV |
| Resolution | 0.1 mV |
| Accuracy | ± 0.2 mV |
| Calibration Option | Yes (Up to ± 200 mV) |
| Ion Range | 0.000 µg/L to 9999 g/L |
| Units | µg/L ↔ mg/L ↔ g/L, ppm ↔ ppt, mmol/L ↔ mol/L |
| Resolution | 4 Significant digits |
| Accuracy | ± 0.3% full scale or ± 0.2 mV, whichever is higher |
| Calibration Points | Up to 5 |
| Conductivity Range | 0.000 to 1.999 µS/cm (k = 0.1) 2.00 to 19.99 µS/cm (k = 0.1, 1) 20.0 to 199.9 µS/cm (k = 0.1, 1, 10) 200 to 1999 µS/cm (k = 0.1, 1, 10) 2.00 to 19.99 mS/cm (k = 0.1, 1, 10) 20.0 to 199.9 mS/cm (k = 1, 10) 0.200 to 2.000 S/cm (k = 10) |
| Units | Auto ranging S/cm, S/m (µS ↔ mS ↔ S) |
| Resolution | 0.05% full scale |
| Accuracy | ± 0.6% full scale; ± 1.5% full scale > 18.0 mS/cm |
| Reference Temperature | 15.0 to 30.0 °C (adjustable) |
| Temperature Coefficient | 0.00 to 10.00 % per °C (adjustable) |
| Cell Constants | 0.070 to 13.00 (adjustable) |
| Calibration Points | Up to 4 (Auto) / Up to 5 (Manual) |
| Resistivity Range | 0.001 MΩ・cm to 20.0 MΩ・cm |
| Resolution | 0.5% full scale |
| Accuracy | ± 0.6% full scale; ± 1.5% full scale > 1.80 MΩ●cm |
| Total Dissolved Solids (TDS) Range | 0.01 to 9.99 mg/L (ppm) 10.0 to 99.9 mg/L (ppm) 100 to 999 mg/L (ppm) 1.00 to 9.99 g/L (ppt) 10.0 to 100 g/L (ppt) |
| Resolution | 0.01, 0.1, 1 mg/L ↔ g/L (ppm ↔ ppt) |
| Accuracy | ± 0.1% full scale |
| TDS Curves | EN27888, 442, NaCl, Linear (0.40 to 1.00) |
| Salinity Range | 0.0 to 100.0 ppt / 0.00 to 10.00 % |
| Resolution | 0.1 ppt / 0.01% |
| Accuracy | ± 0.2% full scale |
| Salinity Curves | NaCl / Seawater |
| Calibration Option | Yes (Manual; 1 point) |
| Temperature Range | -30.0 to 130.0 °C / -22.0 to 266.0 °F |
| Resolution | 0.1 °C / °F |
| Accuracy | ± 0.5 °C / ± 0.9 °F |
| Calibration Option | Yes (± 10.0 °C / ± 18.0 °F range in 0.1 °C increments) |
| Memory | 2000 |
| Auto Data Log | Yes |
| Real-time Clock | Yes |
| Date & Time Stamp | Yes |
| Measurement Modes | Auto Stable / Auto Hold / Real Time |
| Offset & Slope Display | Yes (Segment & Average Slopes) |
| Calibration Alarm | Yes (Programmable: up to 90 days) |
| Auto Shut-Off | Yes (Programmable: up to 30 mins.) |
| Electrode Status | On screen display |
| Diagnostics | Yes |
| Password Setting | Yes |
| Software Upgrade | Yes |
| PC / Printer Communication | Phono jack (USB / RS232C) |
| Meter Inputs | 2 x BNC, 2 x phono (ATC), DC sockets |
| Display | 5″ Custom LCD with backlight and 320 segments |
| Power Requirement | AC adaptor 100 – 240V, 50 – 60Hz |
| Dimensions & Weight | 155(L) x 150(W) x 67(H) mm, 770g |
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Glass Pasteur Pipettes, BORO 3.3 Pack of 250
From AUD 37.50 (Ex GST)
Clear Glass Bell Jar with Glass Stopper
AUD 62.50(Ex GST)
Hofmann Voltameter Spare Platinum Electrodes, Pair
AUD 114.90(Ex GST)
Mineral Specimens for Educational Geology
From AUD 29.90 (Ex GST)
Spirit Lamp, Alcohol Burner, Stainless Steel, Aluminium & Glass Options
From AUD 7.50 (Ex GST)
In-Line Mini DC Ammeter, ±3 A Digital Current Meter
AUD 124.50(Ex GST)
Glass Low Form Beaker BORO 3.3 Size 3000 ML – 2 Pcs/Box
AUD 89.00(Ex GST)
Erlenmeyer Conical Flask, Narrow Neck, Borosilicate Glass (BORO 3.3)
From AUD 2.90 (Ex GST)
DIY Climbing Solar Car Experiment Kit
AUD 47.50(Ex GST)
Polypropylene 2-Way Stopcock with PTFE Plug, for 6 to 9 mm Tubing
AUD 18.90(Ex GST)
You May Also Need
Save 10%
Benchtop Classical Series Multi-Parameter Meter for pH, Conductivity and DO Testing
From AUD 2,467.50 (Ex GST)
Save 10%
Benchtop Touch Screen Multi-Parameter Meter for pH and Conductivity Testing
From AUD 3,146.90 (Ex GST)
Calcium Ion Sensor, Replacement Sensor with 0.1 to 5.0 mmol/L Range
AUD 528.00(Ex GST)
Multi Function Soil Meters with Stem Probes
From AUD 24.90 (Ex GST)
Nitrate Ion Electrode, Replacement Sensor with Selective Flat Electrode
AUD 227.70(Ex GST)
pH Sensor, Replacement Flat Sensor for Pocket pH Meters
AUD 143.00(Ex GST)
Pocket Nitrate Ion Meter, 0.3 mL Sample Testing with Up to 2 Calibration Points
AUD 1,314.50(Ex GST)
Save 10%
Pocket Testers for Portable Water Quality Testing
From AUD 290.50 (Ex GST)
Salt EC Sensor, 0.12 mL Sample Testing with Ti/Pt Black Cell
AUD 143.00(Ex GST)
Salt Electrode, Replacement Sensor with 0.01 to 25% Salt Range
AUD 227.70(Ex GST)
Sodium Ion Electrode, Replacement Sensor with 2 to 9900 ppm Range
AUD 227.70(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
pH Electrode, Gel-Filled Pb-Free Plastic Body, 2 m Cable
AUD 295.00(Ex GST)
pH Electrode, Gel-Filled Pb-Free Plastic Body, 1 m Cable
AUD 255.00(Ex GST)
pH Electrode Needle Type Glass, 3-in-1 Glass Body, 1 m Cable
AUD 540.00(Ex GST)
TOP RATED PRODUCTS
pH Electrode, Gel-Filled Pb-Free Plastic Body, 2 m Cable
AUD 295.00(Ex GST)
pH Electrode, Gel-Filled Pb-Free Plastic Body, 1 m Cable
AUD 255.00(Ex GST)
pH Electrode Needle Type Glass, 3-in-1 Glass Body, 1 m Cable
AUD 540.00(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab