Materials: Borosilicate Glass
Jacketed west Condenser BORO 3.3 Chemistry Grade
From $79.90 (Ex GST)
From $79.90 (Ex GST)
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Jacketed West condenser for compatible chemistry glassware setups
- Made from BORO 3.3 chemistry grade glass
- Available in 200 mm, 300 mm and 400 mm length options
- Joint options include 19/26, 24/29 and 24/40
- Jacketed design supports circulating coolant during operation
- Suitable for controlled condensation in compatible laboratory assemblies
- Confirm length, joint size, tubing fit and application suitability before use
[request_quote_button]
- Description
Description
The Jacketed West Condenser, also known as a West-style laboratory condenser, is designed for controlled condensation in compatible chemistry glassware assemblies where vapour cooling and liquid recovery are required. This condenser is manufactured from BORO 3.3 chemistry grade glass, supporting routine laboratory use where thermal resistance, chemical durability and clear visual observation are important.
The jacketed body allows cooling water or a suitable circulating fluid to pass through the outer jacket during operation. This helps remove heat from vapour passing through the condenser and supports efficient condensation in suitable laboratory setups. The West condenser format is commonly selected where a straight jacketed condenser is required for compatible reflux, recovery or condensation workflows. Users should confirm the selected condenser against the method, vapour load, cooling requirement and full glassware configuration.
Multiple length and joint options are available, allowing laboratories to match the condenser to existing glassware systems. The listed length options are 200 mm, 300 mm and 400 mm, with joint options including 19/26, 24/29 and 24/40. Clear glass construction allows users to observe condensation behaviour, liquid movement and assembly condition during use. The condenser should be supported with suitable clamps and stands, and all tubing connections should be checked before starting coolant flow. This item is supplied as the condenser only. Flasks, adapters, tubing, clamps, retort stands, water supply equipment and additional accessories are not included unless specified separately.
LabChoice Australia supplies BORO 3.3 Jacketed West Condensers for school laboratories, university teaching spaces, research laboratories, QC laboratories and routine chemistry workspaces requiring compatible glassware for controlled condensation workflows.
| Item Code | Size | Socket | Pack |
|---|---|---|---|
| LC-08-JWC671 | 200 mm | 24/29 | 1 |
| LC-08-JWC672 | 300 mm | 24/29 | 1 |
| LC-08-JWC673 | 400 mm | 24/29 | 1 |
| LC-08-JWC674 | 200 mm | 24/40 | 1 |
| LC-08-JWC675 | 300 mm | 24/40 | 1 |
| LC-08-JWC676 | 400 mm | 24/40 | 1 |
| LC-08-JWC677 | 200 mm | 19/26 | 1 |
| LC-08-JWC678 | 300 mm | 19/26 | 1 |
PSSC Inertial Balance Experiment Kit
$77.50(Ex GST)
Mini Power Supply, Low Voltage Regulated Type
From $129.50 (Ex GST)
Educational rock specimens for geology
From $24.90 (Ex GST)
Hybridisation Oven
$6,274.00(Ex GST)
Glazed Gooch Filtration Crucibles
From $5.90 (Ex GST)
Digital Timers, Jumbo Display Countdown and Stopwatch Range
From $32.50 (Ex GST)
You May Also Need
Save 23%
Air Condenser Borosilicate Glass BORO 3.3 Laboratory Grade
From $19.90 (Ex GST)
Allihn Bulb Condenser Borosilicate Glass BORO 3.3 for High Efficiency Reflux
From $49.90 (Ex GST)
Allihn Condenser Soxhlet Extraction BORO 3.3 Glass
From $69.90 (Ex GST)
Dreschel Head Only, Gas Washing Bottle Head Spare, Borosilicate Glass (BORO 3.3)
From $41.50 (Ex GST)
Dropping Funnel, Cylindrical, Ungraduated, Glass Stopcock, BORO 3.3 Glass
From $32.90 (Ex GST)
Jacketed Coil Condenser BORO 3.3 Chemistry Grade
From $137.90 (Ex GST)
Laboratory Beaker, Low Form, Graduated with Spout, Borosilicate Glass (BORO 3.3)
From $2.00 (Ex GST)
Reflux Condenser Angled BORO 3.3 Borosilicate Glass
From $73.90 (Ex GST)
Stirring Rods, Rounded Ends, Laboratory Grade, Borosilicate Glass (BORO 3.3)
From $0.95 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab
