Metal Thermometer clip for holding a Thermometer in a beaker – Pack of 10
AUD 8.90(Ex GST)
AUD 8.90(Ex GST)
- Suitable for compatible laboratory thermometer setups
- Helps support thermometer positioning during routine experiments
- Hole ID listed as 7 mm
- Practical accessory for school, university and teaching laboratory use
- Useful for heating, cooling and temperature observation activities
- Helps reduce direct hand contact with thermometer during setup
- Confirm thermometer diameter and beaker compatibility before ordering
- Thermometer and beaker are not included
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Metal Thermometer Clip, also known as a thermometer beaker clip, is designed to hold a compatible thermometer in position during laboratory temperature measurement activities. This metal clip is used with a beaker to support the thermometer while liquids are being observed, heated, cooled or monitored during approved laboratory procedures. The clip has a listed hole ID of 7 mm, so users should confirm the thermometer stem diameter before ordering or use. It is a practical accessory for school science laboratories, university teaching laboratories and general laboratory environments where glass or compatible laboratory thermometers are used regularly.
The clip helps improve setup stability and keeps the thermometer positioned more consistently during routine temperature observation. Users should confirm compatibility with the thermometer, beaker rim, liquid level, heating method and experiment procedure before use. Glass thermometers should be handled carefully during fitting and removal. Avoid forcing the thermometer through the clip, as this may damage the thermometer stem.
When used near heat, hot liquids or glassware, follow appropriate PPE, handling and supervision procedures. This product is intended for laboratory or educational settings only and should be used under appropriate teacher or laboratory supervision. This item is supplied as the metal thermometer clip only, sold as each. Thermometer, beaker, stand, burner, hotplate, liquids and additional accessories are not included unless specified separately.
LabChoice Australia supplies Thermometer Clips and laboratory thermometer accessories for school science laboratories, university teaching laboratories and general science facilities requiring practical temperature measurement support.
Buchner Funnel, Sintered Long Stem with Ground Joint, BORO 3.3 Glass
From AUD 35.90 (Ex GST)
Boiling Flask, Round Bottom, Borosilicate Glass (BORO 3.3)
From AUD 2.60 (Ex GST)
Air Track Glider Jet Propulsion Attachment
AUD 78.50(Ex GST)
Glass Low Form Beaker BORO 3.3 Size 3000 ML – 2 Pcs/Box
AUD 89.00(Ex GST)
Pocket Ionized Calcium Meter, Cow Side Blood Testing with 0.3 mL Sample Volume
AUD 2,183.50(Ex GST)
Timers and Counters
From AUD 328.90 (Ex GST)
Pocket Twin Folding Magnifier, 6x + 6x, 12x
AUD 6.90(Ex GST)
Air Tracks, 2 m and 2.5 m, Complete with Kits
From AUD 896.90 (Ex GST)
You May Also Need
Digital Max Min Indoor Outdoor Thermometer
AUD 61.50(Ex GST)
Digital Max Min Thermometer, Waterproof, -20 to 50°C
AUD 24.90(Ex GST)
Digital Oral Clinical Thermometer with Case and Clip
AUD 24.90(Ex GST)
Digital Probe Thermometer with Horizontal Display, -50 to 150°C
AUD 31.50(Ex GST)
Digital Probe Thermometer with Vertical Display, -50 to 150°C
AUD 31.50(Ex GST)
Digital Waterproof Max Min Probe Thermometer, -50 to 200°C
AUD 29.50(Ex GST)
Electronic Freezer / Fridge Thermometer with Alarm, -50°C to +70°C
AUD 52.50(Ex GST)
Glass Pocket Thermometer Adapter BORO 3.3 Laboratory Grade
From AUD 12.90 (Ex GST)
Glass Thermometer with Mercury, Yellow Back, Size 300 mm/ 600mm
From AUD 12.00 (Ex GST)
Glass Thermometer, Red Spirit Filled, Yellow Back, Size 300mm
From AUD 9.50 (Ex GST)
Plastic Thermometer Case, Adjustable, Suits All Sizes
AUD 2.50(Ex GST)
Still Head Thermometer Adapter BORO 3.3 Distillation Glass
From AUD 34.90 (Ex GST)
Thermometer Anti-Roll Rings, Blue Rubber, Pack of 100
AUD 44.90(Ex GST)
Thermometer Cone Adapter, Borosilicate Glass with Threaded Top
From AUD 21.00 (Ex GST)
Thermometer Stand, 18 Place Aluminium Storage Rack with Rubber Base
AUD 34.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
LATEST PRODUCTS
Electronic Freezer / Fridge Thermometer with Alarm, -50°C to +70°C
AUD 52.50(Ex GST)
Boyle’s Law High Pressure Air Pump, Plastic
AUD 52.90(Ex GST)
Boyle’s Law High Pressure Pressure Pot Complete
AUD 55.90(Ex GST)
TOP RATED PRODUCTS
Electronic Freezer / Fridge Thermometer with Alarm, -50°C to +70°C
AUD 52.50(Ex GST)
Boyle’s Law High Pressure Air Pump, Plastic
AUD 52.90(Ex GST)
Boyle’s Law High Pressure Pressure Pot Complete
AUD 55.90(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab