E
x
p
l
o
r
e
M
o
r
e
:
Parts & Accessories
Support Rack for Radiation Source and Absorber Alignment
AUD 46.90(Ex GST)
AUD 46.90(Ex GST)
- Small plastic support rack for absorber experiments
- Designed to carry a radioactive source and selected absorber in alignment
- Helps maintain consistent positioning during radiation absorption demonstrations
- Normally part of the Absorber Set Kit LC-80-AP0030-001 as listed
- Suitable for school, university and physics teaching laboratories
- Useful for radiation absorption and shielding demonstrations
- Supports controlled placement of source and absorber during practical work
- Helps improve repeatability of classroom demonstration setup
- Confirm compatibility with the absorber set before ordering
- Rack only, absorber kit and radioactive source are not included
- Radioactive materials must only be handled under approved safety procedures
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Support Rack for Radiation Source and Absorber Alignment, also known as a radioactive source and absorber alignment rack, is a small plastic rack designed for use in educational radiation absorption experiments. The rack carries the radioactive source and the selected absorber in alignment, helping maintain consistent positioning during classroom demonstrations and physics laboratory practical work. This support rack is normally supplied as part of the Absorber Set Kit LC-80-AP0030-001 as listed, making it a useful replacement or support component for compatible absorber experiment setups.
It is suitable for demonstrating absorption, shielding and comparative transmission through selected absorber materials when used with the correct teaching apparatus and approved laboratory procedure. Users should confirm compatibility with the absorber set kit, source holder arrangement, absorber dimensions, detector position and experiment method before ordering or use. Radioactive sources must only be handled by authorised and trained personnel under approved institutional radiation-safety procedures. Follow all local regulatory, school, university or laboratory requirements for storage, use, supervision and record keeping.
Do not use this rack with unapproved radioactive materials, damaged sources, unknown sources or unsupervised student handling. This product is intended for laboratory or educational settings only and should be used under appropriate supervision. This item is supplied as the plastic absorber and radioactive source support rack only. Absorbers, radioactive source, Geiger counter, detector, timer, absorber set kit, storage container, shielding and additional physics accessories are not included unless specified separately.
LabChoice Australia supplies Absorber Support Racks and physics teaching accessories for school science laboratories, university teaching laboratories and educational facilities requiring practical equipment for radiation absorption and shielding demonstrations.
Circuit Board Alligator Clip Leads, 300 mm Pair
AUD 12.50(Ex GST)
Electrostatics Experiment Kits, Static Electricity Experiment Set
From AUD 72.50 (Ex GST)
Magenta Tissue Culture Box, Polycarbonate with PP Lid
AUD 11.90(Ex GST)
Savart’s Tone Wheel Alloy STEM Apparatus, 10 mm and 6 mm Diameter
AUD 109.90(Ex GST)
Moulded Helmholtz Coil Pair, 150 mm Diameter, With Feet and Ruler Included
AUD 226.90(Ex GST)
BeeSpi V Photogate Holder, Adjustable Height and Angle
AUD 93.50(Ex GST)
Glass Low Form Beaker BORO 3.3 Size 400 ML – 6 Pcs/Box
AUD 30.60(Ex GST)
Separatory Funnel, Polypropylene with Stopcock, High Quality
From AUD 19.50 (Ex GST)
You May Also Need
Air Table Bronze Bumper Wires
From AUD 6.90 (Ex GST)
Air Track Attachment Screws, Accessory
From AUD 2.50 (Ex GST)
Air Track End Plug for Later Model Air Tube
AUD 5.50(Ex GST)
Air Track Flat Loop Springs, Stainless Steel
From AUD 10.90 (Ex GST)
Air Track Glider Soft Collision Attachment
AUD 81.90(Ex GST)
Air Track Non-Elastic Velcro Buffer Pair
AUD 12.50(Ex GST)
Air Track Replacement Velcro Strips, 20 × 75 mm, 2 Pairs
AUD 4.90(Ex GST)
Air Track Spark Paper, Motion Recording Roll Black and White
From AUD 18.50 (Ex GST)
Air Track Stop Block Carrier, Felt Lined
AUD 37.90(Ex GST)
Alligator Clips, 4 mm Banana Plug Shank, Pack of 10
From AUD 15.90 (Ex GST)
Banana Plugs, 4mm
From AUD 5.50 (Ex GST)
Banana Plugs, 4mm Laboratory Type
From AUD 14.50 (Ex GST)
Boyle’s Law High Pressure Spare Glass Tubes
From AUD 34.90 (Ex GST)
Brass Filter Pump with Non-Return Valve
From AUD 77.50 (Ex GST)
Cast Iron Bar Breaker Rods, Pack of 10
AUD 15.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
Plain Desiccator, All-Clear Polycarbonate, High Quality
From AUD 125.00 (Ex GST)
TOP RATED PRODUCTS
Plain Desiccator, All-Clear Polycarbonate, High Quality
From AUD 125.00 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab