Lead Acetate Indicator Paper Strips, Vial of 100
$11.00(Ex GST)
- Detect hydrogen sulfide in water, specified sensitivity down to 5 ppm for routine screening checks.
- Dip strip a few seconds, greying often begins around 1–3 ppm, darkens with concentration.
- Colour intensity can progress darker up to about 400 ppm, supports quick comparative assessment.
- Can be used as a moist strip for suspected H₂S areas, distilled water wetting is sufficient.
- Minimal cross-reactivity stated, thiols, thioketones, mercaptans give negative response for selectivity.
- Description
Description
Lead acetate test paper is a visual indicator for detecting hydrogen sulfide (H₂S) in water, useful for screening drinking water, well water, and groundwater where sulfur odour or contamination is suspected. The paper is designed to darken in response to H₂S, providing a fast, easy-to-interpret colour change result without instruments.
To test, dip a strip into the water for a few seconds, then remove and observe the colour. Light greying can begin around 1–3 ppm, and the paper darkens as concentration increases, up to about 400 ppm. The strips can also be lightly moistened with distilled water and placed in an area where hydrogen sulfide is thought to be present, no acetate buffer is required. The test paper is stated not to cross-react with thiols, thioketones, or mercaptans, which produce a negative response.
Instructions
Dip strip in sample water for a few seconds, remove and observe colour.
Light grey can indicate low H₂S, darker grey indicates higher concentration.
For air area checks, moisten with distilled water and place near suspected H₂S source.
FAQs
Q: What does lead acetate test paper detect?
A: Hydrogen sulfide in water, with sensitivity specified as low as 5 ppm.
Q: What colour change should I look for?
A: White paper turning grey, darker grey indicates higher concentration.
Q: What concentration range is referenced?
A: Greying may begin around 1–3 ppm, darkening can increase up to about 400 ppm.
Q: Can it be used outside of water testing?
A: Yes, moisten with distilled water and place in areas where H₂S may be present.
Q: Does it cross-react with thiols or mercaptans?
A: No, thiols, thioketones, and mercaptans are stated to give a negative response.
Similar Products
Signal Generators and Wave Study Units
From $384.80 (Ex GST)
Porcelain Crucible Shelf Rack
$15.00(Ex GST)
Expansion Adapter, BORO 3.3 Glass
From $19.90 (Ex GST)
Litmus Test Paper Strips, Acid/Base Indicator Type
From $5.50 (Ex GST)
ASEP Metal Rod Set (8 Pieces), 3 mm Diameter
$32.00(Ex GST)
TC Treated Cell Culture Flasks, Sterile Culture Surface Range for Routine Cell Work
From $135.00 (Ex GST)
Serological Pipettes, Individually Wrapped Sterile Transfer Type
From $65.00 (Ex GST)
Advanced Resonance Apparatus with 1 m Vertical Scale Included
$187.00(Ex GST)
Centre Zero Student Meter, DC Current Demonstration and Polarity Teaching Type
From $35.00 (Ex GST)
Concave Mirrors, 50 mm Diameter Classroom Optics Range
From $2.50 (Ex GST)
Convex Mirrors, 50 mm Diameter for Virtual Image Optics Practicals
From $2.50 (Ex GST)
Digital pH and Turbidity Meters For Laboratory
From $28.00 (Ex GST)
Double Sided Plain Mirrors, Unbreakable Optics Reflection Range
From $1.60 (Ex GST)
Dual Range Centre Zero Student Microammeter, DC Polarity and Current Teaching Type
From $35.00 (Ex GST)
Glass Mortar and Pestle For Laboratory
From $6.00 (Ex GST)
Glass Writing Marking Pencils, Diamond Tip and Grease Laboratory Type
From $16.70 (Ex GST)
Motor and Generator Teaching Kits, Classroom Energy Transfer Demonstration Range
From $31.00 (Ex GST)
Single Range Student Meters For Circuit
From $35.00 (Ex GST)
Student Triple Range Ammeter, Classroom Current Measurement Type
From $35.00 (Ex GST)
Student Triple Range DC Voltmeter, Physics Lab Voltage Teaching Meter
From $35.00 (Ex GST)
Unglazed Laboratory Porcelain Mortar and Pestle
From $4.50 (Ex GST)
Water Hardness Test Paper Strips, 50 Strip Pack
$48.00(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Boss Head Clamp for Lab Stands, Powder Coated, Heavy-Duty
From $6.50 (Ex GST)
LATEST PRODUCTS
JAVAC VCL 452 Vacuum Pump, Two Stage SAE Tri Connector Type
$390.00(Ex GST)
Laboratory Pulleys, Bench Clamp and Rod Mounting Physics Type
From $8.00 (Ex GST)
Chlorine Test Strips, Mid and High Level Water Testing Type
From $13.00 (Ex GST)
TOP RATED PRODUCTS
JAVAC VCL 452 Vacuum Pump, Two Stage SAE Tri Connector Type
$390.00(Ex GST)
Chlorine Test Strips, Mid and High Level Water Testing Type
From $13.00 (Ex GST)
Laboratory Pulleys, Bench Clamp and Rod Mounting Physics Type
From $8.00 (Ex GST)
Our Reviews
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab