E
x
p
l
o
r
e
M
o
r
e
:
Electrochemistry Meters & Analysers
pH Ion Meter Kit with Calcium Testing, pH Range -2.000 to 20.000 pH
AUD 2,495.00(Ex GST)
AUD 2,495.00(Ex GST)
- Benchtop pH ion meter kit for pH measurement and calcium ion testing workflows
- Includes calcium ion selective electrode, calibration solutions and electrode stand only
- pH range is -2.000 to 20.000 pH with 0.1, 0.01 and 0.001 pH resolution options
- Ion range supports 0.000 μg/L to 9999 g/L with 3 selectable units
- Supports up to 6 pH calibration points and up to 5 user-defined ion calibration points
- Suitable for laboratories, water testing, research, education and calcium ion measurement workflows
[request_quote_button]
- Description
- Datasheets & Manuals
Description
Benchtop pH Ion Meter Kit with Calcium Testing, -2.000 to 20.000 pH, also known as a laboratory pH ion meter kit, is designed for pH measurement and calcium ion testing workflows in laboratories, research facilities, education settings, environmental testing and quality control environments. This meter supports a pH range from -2.000 to 20.000 pH, with selectable pH resolutions of 0.1, 0.01 and 0.001 pH. It supports USA, NIST, NIST2, DIN and custom pH buffer groups, with up to 6 pH calibration points for controlled pH measurement and calibration workflows.
The kit includes calcium ion selective electrode, calibration solutions and electrode stand only. These included components support calcium ion testing setup, subject to normal calibration, electrode care, sample preparation and laboratory operating procedures.
For ion measurement, the meter supports an ion range from 0.000 μg/L to 9999 g/L with 3 selectable units. It also supports up to 5 user-defined ion calibration points, with segment and average slope data available after ion calibration. The meter also supports ORP range from -2000.0 to +2000.0 mV with ORP calibration option. Temperature measurement is supported from -30.0 to 130.0°C / -22.0 to 266.0°F, with temperature calibration option for controlled measurement workflows. Measurement functions include auto stable, auto hold and real-time measurement modes. Electrode status, temperature and reading stability indicators are viewable at a glance, helping users monitor measurement condition during routine laboratory operation.
Data handling features include memory for up to 2000 data sets with date/time stamp, automatic data logging with adjustable time interval and real-time clock support. The meter also includes adjustable auto shut-off up to 30 minutes, password-protected setup mode and software upgrade capability. Connectivity features include USB PC communication with complimentary data acquisition software and RS232 printer communication. The 5-inch digital custom LCD display with backlight, compact footprint, adjustable integrated electrode stand and audible key sound feedback support practical benchtop use.
Important Note: The supplied inclusions list calcium ion selective electrode, calibration solutions and electrode stand only. pH, ORP, temperature or other ion electrode requirements should be confirmed separately before ordering if those measurement functions will be used.
LabChoice Australia supplies this Benchtop pH Ion Meter Kit with Calcium Testing, -2.000 to 20.000 pH, for schools, universities, research laboratories, environmental testing facilities and quality control environments requiring calcium ion testing, pH measurement support, calibration functions, data logging and bench meter connectivity.
Features
- -2.000 to 20.000 pH range
- 0.1, 0.01, & 0.001 pH resolutions
- USA, NIST, NIST2, DIN, and Custom pH buffer groups
- Up to 6 pH calibration points
- Offset, segment and average slopes data after pH calibration
- Adjustable calibration alarm up to 90 days
- -2000.0 to +2000.0 mV range with ORP calibration option
- 0.000 μg/L to 9999 g/L ion range with 3 selectable units
- Up to 5 user-defined ion calibration points
- Segment and average slopes data after ion calibration
- -30.0 to 130.0°C / -22.0 to 266.0°F temperature range with calibration option
- Auto stable, auto hold, and real time measurement modes
- Electrode status, temperature, and reading stability indicators viewable at a glance
- Large memory accepting up to 2000 data sets with date/time stamp
- Auto data log function with adjustable time interval
- Real time clock facilitating time-dependent functions
- Adjustable auto shut-off time up to 30 mins.
- Password protected set-up mode for security
- Software upgrade capability
- PC communication via USB cable and complimentary data acquisition software
- Printer communication via RS232 cable
- 5” Digital, custom LCD display with backlight
- Sleek design with easy-to-use interface and audible key sound feedback
- Small meter footprint with adjustable, integrated electrode stand
- 3 Years warranty
- Height-adjust stopper controls vertical slide of electrode stand arm
| Specification | Details |
|---|---|
| Model | LAQUA-ION2000 pH/ORP/Ion/Temp (°C/°F) Bench Meter |
| pH Range | -2.000 to 20.000 pH |
| Resolution | 0.1 / 0.01 / 0.001 pH |
| Accuracy | ± 0.003 pH |
| pH Buffer Groups | USA, NIST, NIST2, DIN, Custom |
| Calibration Points | Up to 5 (USA, NIST, NIST2) / Up to 6 (DIN, Custom) |
| ORP Range | ± 2000.0 mV |
| Resolution | 0.1 mV |
| Accuracy | ± 0.2 mV |
| Calibration Option | Yes (Up to ± 200 mV) |
| Ion Range | 0.000 µg/L to 9999 g/L |
| Units | µg/L ↔ mg/L ↔ g/L, ppm ↔ ppt, mmol/L ↔ mol/L |
| Resolution | 4 Significant digits |
| Accuracy | ± 0.3% full scale or ± 0.2 mV, whichever is higher |
| Calibration Points | Up to 5 |
| Temperature Range | -30.0 to 130.0 °C / -22.0 to 266.0 °F |
| Resolution | 0.1 °C / °F |
| Accuracy | ± 0.5 °C / ± 0.9 °F |
| Calibration Option | Yes (± 10.0 °C / ± 18.0 °F range in 0.1 °C increments) |
| Memory | 2000 |
| Auto Data Log | Yes |
| Real-time Clock | Yes |
| Date & Time Stamp | Yes |
| Measurement Modes | Auto Stable / Auto Hold / Real Time |
| Offset & Slope Display | Yes (Segment & Average Slopes) |
| Calibration Alarm | Yes (Programmable: up to 90 days) |
| Auto Shut-Off | Yes (programmable: up to 30 mins. |
| Electrode Status | On screen display |
| Diagnostics | Yes |
| Password Setting | Yes |
| Software Upgrade | Yes |
| PC / Printer Communication | Phono jack (USB / RS232C) |
| Meter Inputs | BNC, phono (ATC), DC sockets |
| Display | 5″ Custom LCD with backlight and 320 segments |
| Power Requirement | AC adaptor 100 – 240V, 50 – 60Hz |
| Dimensions & Weight | 155(L) x 150(W) x 67(H) mm, 765g |
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
MCE Syringe Filters, Mixed Cellulose Ester Laboratory Filtration Range
From AUD 115.90 (Ex GST)
Vibration Generator, Mechanical Vibration Demonstration Apparatus
AUD 174.50(Ex GST)
Air Track Stop Block Carrier, Felt Lined
AUD 37.90(Ex GST)
Erlenmeyer Jointed Conical Flask without Graduation, BORO 3.3 Glass
From AUD 59.90 (Ex GST)
Cavity Tiles, 12 Place Plastic Spotting Plates
From AUD 7.50 (Ex GST)
Distillation Glass Adapter with Interchangeable Joint, BORO 3.3 Glass
From AUD 64.90 (Ex GST)
Air Track Air Tubes, 2 m and 2.5 m, with End Seals
From AUD 362.50 (Ex GST)
Disposable Plastic Syringes, Luer Slip No Needle Liquid Handling Range
From AUD 14.90 (Ex GST)
Biological Ear Model, Large 5 Part
AUD 93.50(Ex GST)
U-Shaped Drying Tube with Side Arms and Shut-Off Valves, BORO 3.3 Glass
AUD 34.90(Ex GST)
You May Also Need
Digital pH Pen Meters, 0 to 14 pH
From AUD 34.90 (Ex GST)
pH Sensor, Replacement Flat Sensor for Pocket pH Meters
AUD 143.00(Ex GST)
Pocket ORP and Eh Meter, 0.3 mL Sample Testing with Backlit LCD
AUD 478.50(Ex GST)
Save 10%
Pocket Testers for Portable Water Quality Testing
From AUD 290.50 (Ex GST)
Save 10%
Portable Multi-Parameter Meters for pH, Conductivity and Dissolved Oxygen Testing
From AUD 1,723.50 (Ex GST)
Save 10%
Portable Single Parameters for pH, ORP, Conductivity and DO Testing
From AUD 1,435.50 (Ex GST)
Salt EC Sensor, 0.12 mL Sample Testing with Ti/Pt Black Cell
AUD 143.00(Ex GST)
Salt Electrode, Replacement Sensor with 0.01 to 25% Salt Range
AUD 227.70(Ex GST)
[porto_related_products_slider]
Recently Viewed Products
SELECT OPTIONS
pH Ion Meter Kit with Ammonia Testing, pH Range -2.000 to 20.000 pH
AUD 2,495.00(Ex GST)
SELECT OPTIONS
pH Ion Meter Kit with Fluoride Testing, pH Range -2.000 to 20.000 pH
AUD 2,495.00(Ex GST)
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
pH Electrode, Gel-Filled Pb-Free Plastic Body, 2 m Cable
AUD 295.00(Ex GST)
pH Electrode, Gel-Filled Pb-Free Plastic Body, 1 m Cable
AUD 255.00(Ex GST)
pH Electrode Needle Type Glass, 3-in-1 Glass Body, 1 m Cable
AUD 540.00(Ex GST)
TOP RATED PRODUCTS
pH Electrode, Gel-Filled Pb-Free Plastic Body, 2 m Cable
AUD 295.00(Ex GST)
pH Electrode, Gel-Filled Pb-Free Plastic Body, 1 m Cable
AUD 255.00(Ex GST)
pH Electrode Needle Type Glass, 3-in-1 Glass Body, 1 m Cable
AUD 540.00(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab